User's Manual

Also it provides an overview of the last

20 warnings and faults:

Touch FAULTS.

Press EXIT to go back to the home

screen.

Now press SETTINGS. Display shows

menu which allows to set CAT, ANTENNA, DISPLAY, EBS, CLEAR user settings for one or all

bands, BLOWER mode and another INFO.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

PAGE 1
Also Type it provides an overview the last of supported TCVRofand 20 warnings and faults: working frequency are visible on the display. Touch FAULTS. AUTO LED is ON. Type of supported TCVR and working areback visibletoonthe thehome Press frequency EXIT to go display. screen. AUTO LED is ON. Type of supported TCVR and working frequency are visible on the display. AUTO LED is ON. Now press SETTINGS.
PAGE 2
Type of supported TCVR and Scroll to CAT SETTINGS working (up or down) and touch SET. are visible on the frequency display. AUTO LED is ON. ScrollType to of your TCVR TCVR familyand (up or supported down) and select baudrate (left working or right), then press SET. frequency are visible on the display. Or select NO CAT and press SET. AUTO LED is ON. If youType choose YAESU TCVR or ICOM of supported andNEW, after SET pressing youworking will go to deeper level which allows you to select are TCVR.