User's Manual

Green graph may show one of the 8

parameters. Scroll to request

parameter and press SAVE. Screen

jumps back.

Touch BARG2 in the next step, then

the same way BARG3.

Press EXIT to go back to the Menu

display, then press SERVICE.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

Type of supported TCVR and

working

frequency are visible on the

display.

AUTO LED is ON.

PAGE 1
Green graph may show one and of the 8 Type of supported TCVR parameters. Scroll to request working parameter and press SAVE. Screen frequency are visible on the jumps back. display. AUTO LED is ON. Type of supported TCVR and working Touch BARG2 in the next step, then the same way BARG3. frequency are visible on the display. AUTO LED is ON. Type of supported TCVR and working Press EXIT to go back to the Menu display, then press frequency areSERVICE. visible on the display. AUTO LED is ON.
PAGE 2
Now Type we are in the SERVICE settings of supported TCVR and mode. working Scroll frequency to selected line on andthepress are visible SHOW or SET (dependingdisplay. on the line). AUTO LED is ON. We selected last 20 WARNINGS to Type of supported TCVR and show. working frequency are visible on the Press EXIT and go to thedisplay. SET EBS1 AUTO and press SET. AUTO LED is ON. PA will automatically setTCVR 20mAand of EBS. Type of supported working You can try to do this manually, too.