User's Manual

18
Use next lines and set brightness and
sound volume (use up/down and
left/right). Confirm with SAVE.
Next line is for display calibration. The calibration process defines among other things
touch buttons coordinates. Please DO NOT use this calibration if it is not urgent! Improper
calibration can disable the buttons!!! In such a case call your dealer or the manufacturer,
please.
If you scroll to DISPLAY
CALIBRATION, SAVE button will
change to CALIB button. After
pressing it this window opens.
First you must touch small crossing
point in the bottom right corner, then in
the upper left corner. Do not touch
display elsewhere!
Again, NOT DO IT, if not urgent!
Next lines are for EBS (Electronic Bias
Setting) ON/OFF and for EBS level
selection.
We recommend EBS ON. See next
comment for more details.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.