INSTALLING THERMOSTAT WITHOUT A © WIRE (CONT) Attach the new backdate Insert the wires through the hols In the new back plate. Use an electric all to attach the complete to the wall with the provided wal anchors and screws.
INSTALLING THERMOSTAT WITHOUT A © WIRE (CONT) %. Connect the wires First, connect the following 3 wires: + Wire (R wires Include R. Re, and Rh) to the Re terminal + G wire ta the C terming + to the PEK terminal Then, connect the remaining wires to the corresponding terminals on the back plate (see Wiring Dis grans, page 36). {¥en 3.5] When you ere finished, take a picture. You may need to refer to the connections In this photo while setting up the thermostat.
INSTALLING THERMOSTAT WITHOUT A © WIRE (CONT) 4. Adjust the Jumper (DIP switch) Tum the thermostat over. Adjust the jumper switch as follows {Figs 2.607: + Iffy eve connected wires to both the Rc and Rh terminals on the back plate, then adjust the Jumper switch to OFF. ~ If not, then adjust the jumper switch to ON.
INSTALLING THERMOSTAT WITHOUT A © WIRE (CONT) #. Place the thermostat Make sure all wiring Is pushed Inside the wall. Carefully press the thermostat Into the complete Until t clicks securely Into place. Riggers Rit} Note: Cover any gaps in the wall around the thermostat Alberio from holes may affect temperature readings.
INSTALLING THERMOSTAT WITHOUT A © WIRE (CONT) 2. Tum on your VAC system Tum your VAC system back on. Figure 8:83] f installation was successful the thermostat display screen will turn an, You are now ready to set up your thermostat {see Sating Viaduct, page 41.
Wiring Diagrams The following are wiring diagrams for common VAC systems. You may be ble to use these for reference when Installing your thermostat.
WIRING DIAGRAMS {CONT Conventional Homeschooling System No © Wire {Used with PEG Fore] wae [200 (DDD D EE EEE] Ar Conditioner Fum ace
WIRING DIAGRAMS {CONT Heat Sung [Ar or Geothermal) with Serried Heal © Wie Thermostat ‘Stamen (1 Applicable) GHEE Host Pump Alr Handier
WIRING DIAGRAMS {CONT Heat Sung [Ar or Geothermal) with Dietary Heat No © Wie fused with PEK} — gH SS roomed Heat Pump Alr Handler
WIRING DIAGRAMS {CONT Haas Sung [Ar or Geothermal) with Serried Heal, Two Transformer System — C Wie CLO CCC] 2) oO CEO o min SEE FLEECINESS] mess Foam bc] i i wae B00 80 (i m)a] Heat Pumper Conditioner Fumace/Boller
Getting Started Setup Wizard & Configuration Nita: The smart thermostat Is continually being improved and may change aver time. if there are any differences, follow the arr screen instructions. 1. When the thermostat first powers on, the welcome screen wil appear. Begin the setup wizard. 2. Refer ta the photo of the back plate terminals to find which terminals have wires connected to them, then select these terminals on the screen.
GETTING STARTED (CONT) 4 Select your desired Eco Level. + Higher Comfort level focuses on precise temperature control, but uses more energy. + Higher Eco level focuses an energy efficiency, but wil not control temperature as precisely. + if you are unsure what to select, choose “Balance." This Is a balance of Comfort and Eco. 5. Select whether you would ike fo connect the thermostat to the Sync app (see Valvoline App Setup, page 45). If you don't want to connect to Sync right now, you can to i irate.
Overview of Thermostat Modes VAC Modes: Est Heating only Cool Cooling only Auto Automatically adjusts heating/cooling to reach a target temperature range. Smart Automatically adjusts heating/cooling to reach a single set target temperature. Auxiliary Heat Warms up the room faster If the heat pump can't warm up the room quickly enough. oft Tums off heating and cooling. You can still use the Fan Modes.
OVERVIEW OF THERMOSTAT MODES (CONT) Fan Modes: on/off Tum the fan nonfood. Auto Automatically adjusts fan based on the heating or cooling mode. Circulate Tums fan on for 20 minutes every hour {o circulate air [= This user manual ably includes installation and simple setup instructions. For the extended digital manual, which Includes full operating Instructions and a user guide, scan the GR code: You ean also type the following link into a web browser: www.
Busyness App Setup Nov: The Sync app Is continual being improved and may change over me. ff there are any differences, follow the In-app Instructions, To download the Sync app, scan the GR code or search “Sync" In the Apple App Store or Google Play Store. Note: For Android” users, choose Allow” to use sync. Open the Sync app. you already have an account, tap Log In. To create a new account, tap Sign Up, Note: You must create your own Sync account 1 use third-party services and products.
Connect with Amazon Alex or Google Assistant™ You can use the Sync app to connect your smart thermostat to Amazon Alexei or Google Assistant™. Please follow the In-app Instructions to set up your voice assistant, Note: You must create your own Sync account to access voice assistants. Evelyn App Functions The Sync app allows you to access additional smart thermostat functions, Including these listed below. As the app develops, more features may become available.
Troubleshooting The thermostat display does not turn on. Gently tug on each wire connected to the terminals on the back plate to make sure they are properly inserted and secure. Make sure the cover of your VAC system Is completely closed. Some VAC systems da nt turn on If the cover Is not closed. If you only have one R wire (R wires Include R, Re, and Rh), make sure the R wire Is connected to the Rc terminal (see About & Wires, page 18).
TROUBLESHOOTING [CONT] Forget lock screen password. Unlock the thermostat through the Sync app. Remove the thermostat from the back plate, then reattach It. This will restart the thermostat. Heating and cooling functions are | If you have a heat pump system, change the O/B reversing valve adversary. setting In the thermostat's settings (scan the GR code and see Settings In the extended digital manual). Make sure that the W wire and Y wire are connected to the comet terminals on the back plate.
TROUBLESHOOTING [CONT] Room sensor (sold separately} Make sure the thermostat and room sensor are added to the same does not connect to the thermostat. | Sync account. One of the room sensor's batteries may be low. Replace with 2 AAA batteries. “This user menial only Includes installation and simple setup instructions. For the extended digital manual, which includes full ‘operating Instructions and a user guide, scan the GR code. ‘You can alas type the fallowing link into a web browser: www.
Wryness App Troubleshooting My smart thermostat isn't connecting to the Sync app. Eke sure your phone has Bluetooth® muted on and Is not currently connected to another Bluetooth device. During the setup process, you must be on a secure 2.4GHz WIFI® network, Corridor they the network Is working correctly. Mek sure the WIFI password you entered Is correct. + Teeth should be no spaces at the beginning or end of the password, + Test the password by connecting a different electronic device to the router.
SYNC APP TROUBLESHOOTING [CONT My thermostat Ia offline. Eke sure your router Is connected to the Interment and your pane's network connection Is working. Delete your offing thermostat from the Sync app, Swine let (I0S®) or press and hold {Androld™, then tap Deist Reconfigure the thermostat with the Sync app. Notes Power outages, interment outgoes, or changing WHF routers may course the thermostat 0 go offline.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT PART 18 This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: {) This device may not cause harmful Interference, and {2) This device must accept any Interference received, Including Interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B dial device, pursuant to Part 15 of the FCC Rules.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's author to operate this equipment. FOO RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set fart for an uncontrolled environment. End users must follow the specific operating Instructions for satisfying RF exposure compliance.
‘Warranty Information Product Name | Aura™ Smart Thermostat Model | LT M-A4DISWUS For your own reference, we strongly recommend that you record your order ID and diet of purchase. Date of Purchase Order ID Terms & Policy Kasparov Corporation {‘Kasparov) warrants this product to the original purchaser to be free from defects In material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
WARRANT INFORMATION {CONT} Kasparov will not be liable for Indirect, incidental, or consequential damages In connection with the use of the product covered by this warranty, This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty. This warranty does not extend to products purchased from unauthorized sellers.
WARRANT INFORMATION {CONT} This warranty is made by: Kasparov Corporation 1202 N. Miller St, Butte A Anaheim, CA 92806 Attributions Amazon, Alexei, and all related logos are trademarks of Amazon.com, Inc. or kts affiliates. App Store® Is a trademark of Apple Inc. The Bluetaoth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kasparov Corporation Is under license. Other trademarks and trade names are those of their respective owners.
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team, Kasparov Corporation 1202 N. Miller St, Butte A Hellman, CA 92806 Support Hours Mon-Fri, 9:00 pm PST/PDT Mall: Toll-Free: (888) 726-8520 “Please have your order invoice and order ID ready before contacting Customer Support.