Instructions

Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
THE MOST TECHNICALLY ADVANCED
We DO NOT RECOMMEND to use CR123A batteries as a power source for often and continuous flashlight’s operation.
Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.
Specifications are subject to change without notice.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Model
Tiara A1
Tiara C1
LED / Optics
Cree XP-L or XM-L2 / TIR
Brightness stabilization type
FULL (constant light)
Light output, LED / OTF lumens*
600 / 450
800 / 610
Peak beam intensity, candelas
1840
2160
Hotspot / spill
70° / 1 2
Beam distance*
86 meters
93 meters
Modes, light output (OTF
lumens*) and runtimes
(measured with Sanyo
Eneloop AA 2000 mAh /
Armytek CR123A 1500 mAh
until the light output drops to
10% of the initial value)
Turbo
450 lm / 0.8h
610 lm / 0.7h
Main3
90 lm / 4.2h
90 lm / 6.2h
Main2
30 lm / 11.7h
30 lm / 18h
Main1
9 lm / 35h
9 lm / 55h
Firefly2
1.9 lm / 8d
1.9 lm / 13d
Firefly1
0.15 lm / 90d
0.15 lm / 140d
Power source
1xAA / 1x14500 Li-Ion
1x18350 Li-Ion / 1xR123 Li-Ion / 1xСR123A
Size and weight (without batteries)
Length 86mm, body diameter 24.5mm,
head diameter 29mm, weight 48g
Length 72mm, body diameter 24.5mm,
head diameter 29mm, weight 45g
Tiara
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty
§ Impressively powerful multi-flashlight with 600-800 LED lumens brightness running on one AA / CR123A battery.
§ TIR-optics provides wide light for efficient area illumination.
§ Easy operation and 6 comfortable modes of light output.
§ Reliable headband made of soft and flexible materials for comfortable fixation of the flashlight on the head.
§ Small and light, but at the same time durable and multi-functional flashlight.
§ Prolonged runtimes up to 140 days with one power element .
§ Removable pocket clip and flat tailcap for vertical standing.
§ Complete correspondence to the highest standards of durability and reliability: the flashlight easily withstands fallings, impacts
and vibration.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: service@armytek.com
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Warnings
Care and Storage
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.
Service and Warranty
Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.
Guarantee does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.

Summary of content (2 pages)