MSDS

Armor All Products Company
1221 Broadway
Oakland, CA 94612
Tel. [phone]
Material Safety
Data Sheet
I Product:
ARMOR ALL ORIGINAL PROTECTANT
Description:
MILKY WHITE LIQUID WITH SLIGHT ODOR
Other Designations Manufacturer Emergency Telephone Nos.
Armor All Protectant Original Shine Finish
Surface Cleaner and Protectant
Armor All Products Company
1221 Broadway
Oakland, CA 94612
For Medical Emergencies call:
[phone]
For Transportation Emergencies Chemtrec
[phone]
II Health Hazard Data III Hazardous Ingredients
Non-irritating to skin and eyes. Under normal consumer use and conditions,
the likelihood of adverse health effects is low.
No medical conditions are known to be aggrevated by exposure to this
product.
FIRST AID:
EYE CONTACT:
Remove contact lenses. Flush eyes throughly with plenty
of water for 15 minutes. If irritation occurs, get medical attention.
SKIN CONTACT:
Wash area with soap and water. If irritation occurs, get
medical attention.
INGESTION:
Drink a glassful of water. Get medical attention if effects occur.
INHALATION: If breathing problems occur, remove to fresh air.
Ingredients
Concentration Worker Exposure Limit
Silicone Emulsion 30 - 40% Not established
CAS # N/A
None of the ingredients in this product are on the IARC, NTP or OSHA
carcinogen list.
IV Special Protection and Precautions V Transportation and Regulatory Data
Hygienic Practices: Wash hands with soap and water after use.
Engineering Controls:
Use general ventilation to minimize exposure to vapor
or mists.
Work Practices:
Avoid eye and skin contact and inhalation of vapor or mist.
KEEP OUT OF REACH OF CHILDREN
DOT/IATA/IMO:
Not restricted
TSCA Status:
All ingredients in this product are listed on the TSCA inventory.
EPA - SARA Title III/CERCLA:
Packaged product is not reportable under Sections 311/312. Contains no
chemicals regulated under: CERLA Sections 311, 312, 313, or 304.
VI Spill Procedures/Waste Disposal VII Reactivity Data
Spill Procedures: Absorb and containerize. Wash residual down to sanitary
sewer. Contact the sanitary treatment facility in advance to assure ability to
process washed down material. For spills of multiple products, responders
should evaluate the MSDS's of the products for incompatibility with this
product.
Waste Disposal:
Dispose of in accordance with all applicable federal, state
and local regulations.
Stable under normal use and conditions.
VIII Fire and Explosion Data IX Physical Data
Combustion: Non flammable or explosive.
Fire Extinguishing Agents:
Water, water fog, dry chemical, foam or carbon
dioxide (CO
2
) fire extinguishers.
If product has undergone partial or complete evaporation, may be
combustible.
Boiling Point...............................................................................212°F/100°C
Specific Gravity(H
2
O=1)............................................................1.00 @ 25° C
Solubility in Water................................................................... Easily soluble
pH ................................................................................................................ 7
Evaporation rate (Butyl acetate =1 .......................................................... 0.4
1963, 1991 THE CLOROX COMPANY
DATA SUPPLIED IS FOR USE ONLY IN CONNECTION WITH OCCUPATIONAL SAFETY AND HEALTH DATE PREPARED 1/98