Quick Start Guide

Covered are trademarks of Arlo Technologies, Inc. Other

trademarks are for reference purposes.

For regulatory compliance information including the EU

Declaration of Conformity and e-label information for the

US FCC and Industry Canada, visit

www.arlo.com/about/regulatory/.

Arlo Technologies Intl. Ltd.

Ground Floor, Building 3

University Technology Center

Curraheen Road, Cork, T12 EF21

Ireland

Arlo Technologies, Inc.

2200 Faraday Avenue, Suite 150

Carlsbad, CA 92008 USA

What’s in the box

Total Security Mount

Housing

Security Key

Total Security Mount

Back Plate

Screw Kit

Total Security Mount

March 2020

PAGE 1
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. Other trademarks are for reference purposes. For regulatory compliance information including the EU Declaration of Conformity and e-label information for the US FCC and Industry Canada, visit www.arlo.com/about/regulatory/. Arlo Technologies Intl. Ltd.
PAGE 2
Set up your Total Security Mount Need help? 1. We are here for you. Place the back plate with the arrow pointing up and secure it with screws. For drywall, use the wall anchors we provide. 2. Insert your camera with its battery into the Total Security Mount housing. 3. To attach the housing to the back plate: Align the small screw in the housing with the dot on the back plate. Turn the housing clockwise until it clicks in place. Use the security key to tighten the small screw. 4.