Arlo Pro Add-On Camera Quick Start Guide
What’s Included Welcome Arlo Pro WireFree camera Rechargeable battery Power adapter Magnetic wall mount Mounting screw Power adapter cable Thank you for choosing Arlo Pro. Getting started is easy.
Insert the Battery Sync Your Camera With the Base Station 1. Unlock the battery compartment by pressing and holding the latch. 1. 2. Gently pull the battery door back to open the compartment. 3. Align the battery contacts. 4. Insert the battery. 5. Close the battery door. 4 Bring the camera within 1 to 3 feet (30 to 100 centimeters) of the base station. Note: Cameras must be synced one at a time.
2. Press the Sync button on the top of the base station for about two seconds. Release the button. 3. Wait for the Sync Status LED to blink green. 4. Press the Sync button on top of the camera for about two seconds. Release the button. A blue LED on the camera blinks slowly when the sync process starts. A blue LED on the camera blinks rapidly to confirm sync. The camera is ready for viewing. Note: The LED blinks amber if the sync is not successful. You must repeat the sync process.
Charge Your Arlo Pro Battery 3. Connect the other end of the adapter cable to the camera. 4. Plug the power adapter into an electrical outlet. The Arlo Pro battery is fully charged when it leaves the factory. ¾¾ If you need to recharge the battery: 1. Place the camera indoors. If you are using the camera outside, bring it inside while charging the battery. 2. Connect the power adapter cable to the camera power adapter. Note: You must use an Arlo Pro power adapter and cable to charge the battery.
You’re Done! Congratulations! Your Arlo camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com. 10 Camera LED Guide General Syncing Charging Blink blue once The camera is powered on. Slow blinking blue The camera is searching for a base station. Fast blinking blue The camera is connected to power. Blinking blue and amber A firmware update is in progress. DO NOT TURN OFF THE CAMERA.
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
