Cut Sheet

Cord Grips
Arlington
www.aifittings.com Email: [e-mail] Tel: [phone] Fax: [phone]
D-1
A
B
C
Low-Profile
Strain Relief
Cord Connectors
Zinc die-cast.
Liquid-tight • Oil-tight.
Furnished with sealing ring
and locknut.
Low-Profile
Strain Relief
Cord Connectors
Non-metallic.
Liquid-tight • Oil-tight.
Furnished with
sealing ring and locknut.
Arlington’s Low Profile Cord Connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the
industry, so there are fewer items to stock. A liquid-tight seal and superior pullout resistance is accomplished by just tightening the nut. A sealing
ring is furnished to assure a liquid-tight seal when installing in non-threaded openings.
A
C
E105706 LR49636
ZINC
LOCKNUT
POLYETHYLENE
SEALING RING
ZINC
BODY
NYLON
GRIPPER
SANTOPRENE
®
GROMMET
ZINC
NUT
ZINC
LOCKNUT
POLYETHYLENE
SEALING RING
NYLON
BODY
NYLON
GRIPPER
SANTOPRENE
®
GROMMET
NYLON
NUT
B


WHITE SEALING
RING MATCHES
PRODUCT
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
TRADE
SIZE
CORD
RANGE
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
LPCG503Z
*
50352 1/2 .100-.300 25 100 1.792 .630 1.042
LPCG50Z
*
36110 1/2 .200-.472 25 100 1.792 .630 1.042
LPCG507Z 50356 1/2 .385-.750 25 100 2.178 .517 1.305
LPCG753Z
*
36105 3/4 .100-.300 10 50 1.963 .570 1.042
LPCG754Z 50764 3/4 .240-.472 10 50 1.963 .570 1.305
LPCG757Z 50766 3/4 .385-750 10 50 2.250 .600 1.305
*
ULnot applicable for under .240 wire diameter -- wire strength will
not meet UL’s 35lb pullout test requirement for the fitting.
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
TRADE
SIZE
CORD
RANGE
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
LPCG503
*
50350 1/2 .100-.300 25 100 1.792 .630 1.042
LPCG50W 32875 1/2 .200-.472 25 100 1.792 .630 1.042
LPCG50
*
80086 1/2 .200-.472 25 100 1.792 .630 1.042
LPCG507 50354 1/2 .385-.750 25 100 2.178 .517 1.305
LPCG753
*
50760 3/4 .100-.300 10 50 1.963 .570 1.042
LPCG754 50762 3/4 .240-.472 10 50 1.963 .570 1.305
LPCG757 36100 3/4 .385-.750 10 50 2.250 .600 1.305
50LPCGBAG
▲
55080 1/2 .100-.472 - 500 1.792 .630 1.042
75LPCGBAG
▲
55082 3/4 .100-.472 - 100 1.963 .570 1.305
E105706 LR49636


*
ULnot applicable for under .240 wire diameter -- wire strength will not
meet UL’s 35lb test requirement for the fitting.
▲
Includes UFgrommet 14/2 to 12/2. Bags not available in black.
When ordering in black, add suffix “BL” to catalog number.
When ordering in white, add suffix “W”to catalog number.
Section_D_Cord Grips 11/5/12 1:51 PM Page 1