Specifications
Arlington’s non-conductive box extenders
extend set back metal or non-metallic
electrical boxes up to 1-1/2 inches,
the easy way!
They work with any single gang device
and most steel and non-metallic outlet
boxes, and provide a level, fully
supported wiring device that’s flush with
the wall surface. In steel boxes they
prevent arcing and shorting by creating
a barrier between the box and device
screws.
Our newest box extender, the BE1X, has
a slightly larger flange that provides extra
device support when the wall opening is
miscut or oversized. It accommodates
midi or maxi cover plates and costs the
same as our ‘regular’ single gang BE1.
If you normally use a midi plate this is
the box extender for you!
• Complies with NEC 2014,
article 314.20 (set back boxes)
• 2-hour fire rating
UL/CSA Listed Box Extenders
NEW!
Large flange
BE1X
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
www.aifittings.com
Arlington
BE1X
Single gang
with larger flange
Patented
THE Answer for Set Back Electrical Boxes
Problem:|
Set back box
Made in USA
BE1X
BE1
Aahh...
Better
support
for device
Oops...
Same Cost as BE1
NEW
!
La
rg
e
r
Pe
r
fo
ra
te
d
Fla
n
g
e
BE1
BE1X
BE1X
Trimmable
to fit standard
wall plates
View Video