User's Manual

10" LED SELFIE RING LIGHT
ATL010US
User Manual
For Photography/Live Streaming/Beauty/Makeup/Nail Salon and other lighting
applications.
Installation:
① Unscrew the adjusting knob at the bottom of the Tripod
② Pull the legs straight down and into position
③ Adjust the tripod to the appropriate height and tighten the fixture
④ Install Ball Joint
⑤ Connect the ring light and the Ball Joint together
⑥ Install the phone holder
Instructions:
 After the installation, connect the USB to the power supply and press
the to light up.
 can adjust the color temperature. (Cold Light, Nature Light, Warm Light)
 can adjust the brightness of the ring light. There are 10 color levels,
you can adjust the light to a comfortable level as you need .
 Finally, press the to turn off the power.
Instructions of bluetooth remote:
1. Open the remote and blue lamp will flicker.
2. Open the phone bluetooth and search new service, and then connect it.
3. After matching and connecting, open the phone camera app.
4. If it’s iPhone, you can straightly use remote to control photographing.
5. If it’s Android, you can straightly use remote to control photographing. Or
download camera 360 app and open the app, then choose volume key as shooting
button in settings to control the remote.