User Manual

Safety Precautions
Do not install Arkon products over an air bag cover or within
the air bag deployment zone. Arkon Resources, Inc. assumes no
responsibility of liability for injury or death as a result of car crashes
and / or air bag deployment.
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
!
Consumer Hotline:
USA [phone]
INT ’L [phone]
Monday - Friday 9am - 5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan & China
© Copyright 2015 Arkon Resources, Inc.
The Mobile Mounting Specialists™
Attach the appropriate seat bolt bracket to the mount with the
included bracket bolt and hex key. Be sure to position the spring
washer between the bolt and bracket as shown.
With a socket wrench, loosen the passenger seat rail bolt, insert the
seat rail bolt bracket, and retighten the seat rail bolt.
1
2
3 4
IMPORTANT: Do not place mount in or near an air bag
deployment zone or where it will obstruct view of the road.
!
Package Contents:
TAB001 - Universal Tablet Holder
HD001 - 22” Heavy-Duty Aluminum Floor Mount
Bracket Bolt
Spring Washer
Seat Bolt Bracket
Mount Base
Seat Rail Bolt
Seat Rail Bolt
Seat Bolt Bracket
Seat Bolt Bracket
HD001TAB001
TAB801 | 22” Heavy-Duty Aluminum Seat Rail Floor Mount with Universal Tablet Holder
Attach a holder to the mount by inserting the Dual T-Tabs into the
holder and sliding the holder down to lock.
Insert tablet into holder by pushing down on the bottom spring-
loaded support legs with the tablet. Slide the top of the tablet
under the top support legs until it fi ts snuggly in the holder.
Dual-T Head
Universal Tablet Holder
rev.040915
Includes:
(3) Seat Bolt Brackets
(1) Bracket Bolt
(1) Spring Washer
(1) Hex key
Push down
IMPORTANT: Install the appropriate size support legs on the holder that will work for your device.