Important Safety Instruction Please read the following instructions carefully. This manual should be retained for future use. i Unplug the monitor from its parer source before cleaning it. Do not spray liquid cleaners directly onto the unit. Stand away from the monitor and spray the cleaning solution onto a rag. Then clean the monitor with the slightly dampened rag. D0 not place your monitor near 4 window.
8. Do not remove the cover or attempt to service this unit by yourself. You may void your warranty. Servicing of any nature should be performed only by an authorized technician 9. If any of the following occur, immediately unplug your monitor and call an authorized technician. «The power cord or plug is frayed or damaged. + Liquid has been spilled into the monitor, of it has been exposed to rain, The monitor has been dropped or the case has been damaged 10.
TABLE OF CONTENTS 1 INTRODUCTION. Plug & Play USB Function . Unpacking... 2 INSTALLATION... Connecting the Monitor and Stand Choosing A Workstation... ‘The Signal Cable Connection .. The AC Connection 3 OPERATION wns Tile & Swivel Adjustments. Power Controls On-Screen Display Controls . Turning OF SOD. Manually Degassing the Monitor... 4 ICON DESCRIPTIONS... 5 TECHNICAL SPECIFICATIONS... Specifications... Preset Lining 6 TROUBLE SHOOTING .onmmusnrrirmmons Power Display.
. Plug & Play Unpacking This monitor complies with fhe DC and DANCER (Display Data Channel) scarification. These standards, et by the YEAS (Voids Electronics Standards ‘Association, specify how a monitor unjust communicate with the video adapter to transfer preset information such as resolutions and retrofire rates. Once transformer, the information is then matched with the video adapters supported resolutions and refresh rates. This matching allows the monitor to run at the .
EE 2 INSTALLATION Choosing A Workstation Connecting the Monitor and Stand When choosing an appropriate workspace, keep these few things in mind sturdy, love surface ® Align the stand’s four tabs with the slots on the bottom of the monitor. ® An electrical wall outlet und a telephone wall jack near the computer. ® insert the tabs into the slots. . ~ ® At least 3-inch clearance at the back of the computer to allow for the ® Side the stand towards the front of the monitor and secure, required airflow.
3 OPERATION Tilt & Swivel Adjustments “The monitor is capable of both tis and swivel adjustments. +157 5 Figure 5: Tilt Adjustment ® With the tilt feature, the monitor is capable of vertical adjustments of +15° 105°. ® The wive! feature allows for horizontal monitor adjustments of +60° 10-60" . Figure 6 : Swivel Adjustment Power Controls “The parer controls are located on the right side of the monitor's front panel.
Rotation “Fis control adjusts the tit of the screen image relative to a horizontal line. Color RGB) | This is cantor} selects the different carol temperature (user, 6500" k, 9300° K) of the screen image. Select user color, and press OTC to adjust the relative acquits of red, vine and green in the image. Language glee Bowman} {ogi Fess Dutch + This control allows the user to choose the language in while the control names are display.
.. 6 TROUBLE SHOOTING Power This section will try fo anticipate potential problems that you may encounter in Symptom : The monitor is switched On, but the power LED is the day-to-day use of your monitor. Included in this section is information which not lit. should help solve these problems for you. If after trying the suggested solutions, } i your monitor sill does not faction properly, please contact your authorized Solution: Switch the monitor Off. Then check to make sure Service center.