CONTENT FCC NOTE IMPORTANT SAFETY INSTRUCTION GENERAL INFORMATION PRECAUTIONS INSTALLATION THEORY OF OPERATION OPERATION KEYS FUNCTIONS AND DESCRIPTIONS SPECIFICATIONS
FEDERAL COMMUNICATIONS COMMISSION NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, if’ not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Important Safety Instruction Please read the following instructions carefully. This manual should be retained for future use. unplug the monitor from its power source before cleaning it. Do not spray liquid the unit. Stand away from the monitor and spray the cleaning sightly dampened rag. cleaners directly on solution onto a rag. Then clean the monitor with the s posing the monitor to rain, water, a Do not place your monitor sear a window moisture or sunlight can severely damage it.
Important Safety Instruction please read the following instructions carefully. This manual should be retained for future use. 3. 1 Unplug the monitor from its power source before cleaning it. Do not spray liquid cleaners directly note the unit. Stand away Tom the monitor and spray the cleaning solution onto a rag. Then clean the monitor with the slightly dampened rag. Do not place your monitor near a window.
The monitor has been dropped or the case has been damage: 1G, Power source: For 120V operation, use only a power card which has a grounding-type plug, rated 123V/6A min. For 240V operation, use only a power cord which has a tandem blade grounding-type, rated 250V/6A min. The unit uses a power cord with a female connector complying (EC320, rated ‘6A min for North America, rated 250V/6A mij he European area. V1. Power inlet is the main disconnected device.
General Information This monitor is a fully microprocessor controlled auto scan color display monitor. With its high resolution and multi frequency range. it can be driven by both standard graphic adapters and/or specially designed graphic cards. In order tg ensure proper usage, please thoroughly read the contents of this manual. Precautions I.
Theory Of Operation User can adjust "SCREE Press Simultaneously: LED function and description performance as below: «7 :Recall Factory Seating LED Indicator | Display Feature Descriptions Contrast (£3) Stronger Weaker Brightness ) Brighter (VV) Darker Vertical Size Bigger (Vy Smaller Vertical Position (£5) Move Up (V) Move Down Horizontal Size (5) Wider (\V) Narrower Horizontal Phase 20) Shift To Right Shift To Left Pin Cushion (£23) Outward () Inward Trapezoid (2) Top Adi (V) Boom Adj.
Operation Keys Functions and Descriptions Keystroke Friction Descriptions To select the display feature and adjust the feature which has selected. Indicated by a lit LED. Continuing to press this key until the appropriate display feature has been selected and indicated by 2 lit LED. To adjust the display feature as specified in Section A. Press and hold, and the function will be automatically repeated. The LED will blink for the screen reach the maximum, adjust the display feature as specified in Section A.
Specifications lenience 15en/e Feature Descriptions. Descriptions Size 147 color screen 13” color serene Dot pitch 028mm Deflection angle 90 degrees 24 degrees Phosphor P22 P22 Face treatment Dark glass with Non-glare treatment | Dark glass Deflection Characteristics Horizontal frequency Vertical frequency 31.