Installation Guide

ManualsBrandsAries ManualsAutomotiveWinch Hawse Fairlead

PAGE 1 • 2156070-INS-RB • 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Product Image

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

Refer to the table to the left when securing hardware during the

installation process to help prevent damage to the product or vehicle.

Level of Difﬁculty

Easy

Parts List

1 Hawse fairlead

2 Socket cap screw,

M10 x 1.50 x 30mm

4 Flat washer, M10

2 Lock washer, M10

2 Hex nut, M10

Tools Required

Allen wrench,

8mm

Wrench, 17mm

Scan

for helpful

install tips

INSTALLATION MANUAL 2156070

Torque Speciﬁcations

METRIC

M6 bolt 3 ft.-lbs.

M8 bolt 7 ft.-lbs.

M10 bolt 16 ft.-lbs.

M12 bolt 28 ft.-lbs.

SAE

1/4" bolt 3 ft.-lbs.

5/16" bolt 7 ft.-lbs.

3/8" bolt 16 ft.-lbs.

7/16" bolt 20 ft.-lbs.

1/2" bolt 28 ft.-lbs.

Step 1

Locate the two mounting holes

on the front bumper of the vehicle.

Place the fairlead onto the front bumper

and secure the fairlead to the bumper

using two M10 bolts, four M10 ﬂat

washers, two M10 lock washers

and two M10 nuts.

Tighten all hardware to the

recommended torque speciﬁcations

listed in the table above.

With the fairlead installed,

periodic inspections should

be performed to ensure all

mounting hardware remains tight.

