User's Manual

[鍵入文字]

ARGtek Communication Inc. www.argtek.com

E-Mail: sales@argtek.com Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742

PAGE 1
[鍵入文字] ARGtek Communication Inc. E-Mail: sales@argtek.com Tel:+ 886-2-2999-6958 www.argtek.
PAGE 2
[鍵入文字] AP Router DC 12V Power Adapter Antenna Manual/QIG CD 1 1 2 1 Before installing the router, connect your PC to the internet through your broadband service. (If there is any problem, contact your ISP.)Then proceed through the following steps. 1. 2. 3. 4. 5. 6. Turn off your PC(s), cable/ ADSL modem and the router. Adjust the antenna if needed. Normally, straight up on router is good. Connect the PC(s) and each switch/hub on your local area network to the LAN ports on the router.
PAGE 3
[鍵入文字] . ARGtek Communication Inc. E-Mail: sales@argtek.com Tel:+ 886-2-2999-6958 www.argtek.
PAGE 4
[鍵入文字] The AP Router is delivered with the following factory default parameters on the Ethernet LAN interfaces. Default IP Address: 192.168.1.254 Default IP subnet mask: 255.255.255.0 Web login User Name: Web login Password: The device has three operation modes (Gateway/Bridge/WISP). The default IP addresses for the device are 192.168.1.254, so you need to make sure the IP address of your PC is in the same subnet as the device, such as 192.168.1.X.