RA-7120 RFID Scanner User Guide http://www.argox.com Version: Draft service@argox.
RA-7120 User Manual Revision History Changes to the user manual are listed below: Version Draft Date (Y/M/D) Description 2020/4/17 ii Page #
RA-7120 User Manual About this Manual This manual explains how to install, operate and maintain the RA-7120 UHF RFID scanner. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from the manufacturer. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.
RA-7120 User Manual Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RA-7120 User Manual RF exposure warning The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
RA-7120 User Manual RoHS Statement This device conforms to RoHS (Reduction Of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. TaiwanNCC Warning Statement 取得審驗證明之低功率射頻器材,非經核准,公司、 商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。低功率射頻器材之使用不 得影響飛航安全及干擾合法通信;經發現有干擾現 象時,應立即停用,並改善至無干擾時方得繼續使 用。前述合法通信,指依電信管理法規定作業之無 線電通信。低功率射頻器材須忍受合法通信或工業、 科學及醫療用電波輻射性電機設備之干擾。 Laser Information The Argox RA-7120 is certified in the U.S.
RA-7120 User Manual CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light. Use of optical instruments with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, and magnifying glasses. This does not include eyeglasses worn by the user. IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
RA-7120 User Manual The length of time that a battery power lasts depends on the battery type and how the device is used. Conserve the battery life through the following: Avoid frequent full discharges because this places additional strain on the battery. Several partial discharges with frequent recharges are better than a deep one. Recharging a partially charged lithium-Ion battery does not cause harm because there is no memory. Keep the lithium-Ion battery cool. Avoid a hot car.
RA-7120 User Manual CAUTION! Do not charge batteries at a temperature lower than 0°C, which will increase the internal resistance to cause heat and make the batteries unstable and unsafe. Please use a battery temperature detecting device for a charger to ensure a safe charging temperature range. Battery Storage and Safety Notice Although charged Lithium-Ion batteries may be left unused for several months, their capacity may deplete due to buildup of internal resistance.
RA-7120 User Manual Contents ABOUT THIS MANUAL ........................................... III REGULATORY COMPLIANCE STATEMENTS.............. IV FCC WARNING STATEMENT ......................................... IV CANADIAN COMPLIANCE STATEMENT..............................V EUROPEAN CONFORMITY STATEMENT .............................V ROHS STATEMENT ..................................................... VI LASER INFORMATION .................................................. VI BATTERY NOTICES .................
RA-7120 User Manual Introduction The RA-7120 provides Radio Frequency Identification (UHF RFID), with optional bar code scanning functionality. The unit can be used stand alone or paired with a BT wireless technology enabled host device (such as Android devices). NOTES: Some screens or windows shown in this guide may differ from the actual screens shown on the device. This guide refers to screens and features from the Argox UHF RFID mobile unit and Argox scanner control applications.
RA-7120 User Manual RA-7120 Features Top View 1 2 3 4 No. 1 Component Power Button / Power Indicator / RFID Power Switch Description Power Button: Hold and press this button for at least 2 seconds to power on or off the reader. Power Indicator: The indicator stays solid green when the reader is powered ON, while the indicator stays solid orange when the reader is in the charging mode.
RA-7120 User Manual 3 Barcode Scan Indicator 4 UHF RFID Indicator When the reader has a good read, its LED indicator blinks in green along with an optional vibration signal. UHF RFID reader emission power high (Green) / low (Red) LED indication Front and Rear Views 3 1 4 2 5 No.
RA-7120 User Manual Charging the Battery in the Reader Before charging, ensure that you follow the guidelines for battery safety. Before using the RA-7120 for the first time, charge the battery until the LED indicator of the power button turns solid green. To charge the reader, connect the reader to a desktop PC or laptop PC with a USB cable or with an optional power adapter (DC output: 5V, 1.5A). or Charge the RA-7120 for at least 12 hours before initial use.