TC Marston White Shake XL Blanket Box 620/9465 120cm 40cm 45cm 3 Issue 1 - 10/08/16
Components - Panels If you have damaged or missing components, call the Customer Helpline:03456 400800 Please check you have all the panels listed below 1 Top panel x 1 2 Front panel x 1 3 Back panel x 1 4 Side panel x 2 5 Bottom panel x 1 6 Bottom rail x 1 Components - Fittings Please check you have all the fittings listed below Note:The quantities below are the correct amount to complete the assembly .In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 A Assembling front panel and back panel Screw locking pin A into front panel 2 and back panel 3 as shown 2 A A A A A 3 Step 2 a: B Assembling side panel a: Insert wooden dowel C into front panel and bottom rail 6 as shown. 4 6 B 4 Attach side panels 4 and bottom rail 6 to front panel 2 . C Insert locking nut B into side panel and bottom rail as shown and tighten it with a screwdriver.
Assembly Instructions Step 2 - continued b: C Assembling side panel 3 b: Slide down bottom panel 5 along grooves in side panel and front panel. 5 Repeat above steps to assemble back panel 3 as shown. 6 B Step 3 Assembling side panel NOTE: It would be useful to ask someone to help you at this stage. a: a: Fix hinges E to top panel using 6 x screw F as shown.
Assembly Instructions Step 3 - continued Assembling side panel b: NOTE: It would be useful to ask someone to help you at this stage. F 1 E b: Attach top panel 1 onto the unit with hinge E and screw F as shown. c: c: Fix spring hinge D to top panel 1 and back panel 3 using 16 x screw F as shown. D F 1 After above assembly, please double check and make sure all screws are firmly fixed before use.
