ALL IN ONE HALLWAY UNIT 392/9188 65cm 44cm 177cm Issue 1- 30/03/15
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3.. plastic bags and separate them into their groups. • During assembly do not stand or put weight on the product, this could cause damage. • Assemble the item as close room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
1 2 Top panel x 1 (65(w)cm x 21.5(d)cm) 4 Hook base bar x 1 (59(w)cm x 5(d)cm) 8 Lower back panel x 1 (59(d)cm x 37(w)cm) 12 Long cross bar x 1 (64.5(w)cm x 8(d)cm) 3 Upper right side panel x 1 (132(w)cm x 19.5(d)cm) 5 Long cross bar x 1 6 (59(w)cm x 8(d)cm) 9 Front panel x 1 (59(d)cm x 37(w)cm) 13 Cover panel x 1 (65(w)cm x 35.4(d)cm) Upper left side panel x 1 (132(w)cm x 19.5(d)cm) Lower left side panel x 1 7 (43.5(w)cm x 42.5(d)cm) 10 Bottom panel x 1 (59(w)cm x 39.
35mm Male camlock x 24 Female camlock x 28 30mm Wooden dowel x 16 41mm Male camlock x 4 Nut x 4 12mm Screw x 16 Hinge x 2 Spring hinge x 1 25mm Screw x 4 12mm Screw x 5 20mm Screw x 24 Safety strap x 1 N 35mm Screw x 1 P Hook x 4 Washer x 2 Q Lid x 8 O Wall plug x 1
Using Camlocks Connect the male camlock as directed in the assembly instructions using a screwdriver. lnsert the female camlock as shown in the instructions Note: ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock. Push the male camlock into the entry hole. Turn the female camlock clockwise with a screwdriver. You should feel a click when the camlock is locked in place. The joint is now secure.
A A Insert 10 x 35mm male camlock A into inside of top panel 1 , upper right side panel 2 and upper left side panel 3 as shown. 1 3 A A 2 A Fix 2 x hinge G on Long cross bar 5 using 4 x 12mm screw F as shown. F F G F 5 A A A Insert 14 x 35mm male camlock A into inside of lower left side panel 6 , lower right side panel 7 and long cross bar 12 as shown. Attach 2 x short cross bar 11 to the lower left side panel 6 and lower right side panel 7 using 4 x 25mm screw I as shown.
Insert 4 x wooden dowel C into inside of lower right side panel 7 . Attach lower back panel 8 and front panel 9 to it using 4 x female camlock B as shown. Tighten female camlocks with a screwdriver. Please refer to the “Using Camlocks” section at the front of this instruction for further assistance. 8 9 C B C 7 Insert 2 x wooden dowel C into inside of lower right side panel 7 . Attach bottom panel 10 to it using 2 x female camlock B as shown. Tighten female camlocks with a screwdriver.
7 Insert 4 x wooden dowel C into long cross bar 5 as shown. Attach hook base bar 4 and long cross bar 5 to upper right side panel 2 using 4 female camlock B as shown. Tighten female camlocks with a screwdriver. C 4 B 5 B 2 3 8 B Attach upper left side panel 3 to the hook base bar 4 and the long cross bar 5 using 3 x female camlock B as shown. Tighten female camlocks with a screwdriver.
Attach top panel 1 to the upper right side panel 2 and upper left side panel 3 using 4 x female camlock B as shown. Tighten female camlocks with a screwdriver. 3 1 B 2 D 10 Insert 4 x nut E into the lower left side panel 6 and lower right side panel 7 and adjust the threaded hole of nut E and the predrilling male camlock hole of side panels in a line. Insert 4 x 41mm male camlock D into the predrilling male camlock holes of side panels and screw them into nuts E .
11 Connect the assembled upper part to the assembled lower part using 4 x female camlock B as shown. Tighten female camlocks with a screwdriver. B 12 Attach cover panel 13 to the long cross bar 5 using 4 x 12mm screw F as shown.
13 Fix spring hinge H on the lower right side panel 7 and the cover panel 13 using 4 x 12mm screw J as shown. 13 7 H J 14 Fix 4 x hook P on the hook base bar 4 using 8 x 12mm screw F as shown. attach upper back panel 14 to the assembled part using 24 x 20mm screw K as shown.
15 Fix unit to wall using 1 x 12mm screw J , 1 x safety strap L , 2 x washer N , 1 x 35mm screw M and 1 x wall plug O as shown. J O N L M Q Q Cover 8 x lid Q on the exposed female camlock holes as shown. Q Q If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800 Argos LTD.
