Assembly Instructions

ManualsBrandsArgos Home ManualsHome and furnitureNew Malvern Hallway 6 Drawer Unit

Malvern 6 Drawer Unit

Dimensions

Width - 63cm

Depth - 26.5cm

Height - 76cm

Important – Please read these instructions fully before starting assembly

Assembly Instructions - please keep for future reference

Issue 1 - 23/03/2015

Customer Helpline:

0845 6400800

If you need help or have damaged or missing parts, call the

346/8618

LP. 260.96.078A

Summary of content (5 pages)

PAGE 1
Malvern 6 Drawer Unit Assembly Instructions - please keep for future reference 346/8618 Dimensions Width - 63cm Depth - 26.5cm Height - 76cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800 LP. 260.96.
PAGE 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly Check you have all the components and tools listed on pages 3 and 4. • Do not stand or put weight on the product, this could cause damage. • Assemble the item as close plastic bags and separate them into their groups. room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
PAGE 3
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0845 6400800 Note: may be supplied than are required.
PAGE 4
Assembly Instructions Step 3 The Malvern Unit is floor standing, but it is recommended that the unit is secured to the wall. 1. Connect 1 x wall strap D to the reverse of the unit with 1 x washer EE A and screw A. C E B E A D 2.Move the units into desired position. 3. Mark the wall with a suitable scribe the position of the fixing hole. Warning: Before driling,check wall for hidden pipes and cables. 4. Drill hole and insert wall plug D B 5.
PAGE 5
A Guide to Wall Mounting & Fixings lmportant: when drilling into walls always check that there are no hidden wires or pipes etc. lmportant note: lf plastic wall plugs(rawl plugs) are supplied with your product, e.g.: Make sure that the screws and wall plugs being used are suitable for supporting your unit.Consult a qualified tradesperson if you are unsure. Hints: General rule: not sure. always use a larger screw and wall plug if you are - these are only suitable for use in masonry walls.