Operation Manual

DA-1 digital amplier
1. Speaker output right
4. Coax
(digital input)
2. Speaker output left
3. Mini-jack
(analogue
input)
The Argon DA-1 is a very simple-to-use prod-
uct and at the same time it
contains advanced digital technology.
In just a few steps you will have hooked up
your Argon DA-1 and be ready to play.
Connect the DA-1 to the Power supply and
connect to an electric outlet.
Connect any audio source (digital or analogue)
using one of the connections no. 3-6 as shown
on above. The cable to use, should be included
with the audio source when you bought it.
Connect the loudspeaker cables to the DA-1
using either the included xed mounted cables
or using the adaptor cables (as shown below)
combined with your own choice of cable type/
length.
Select the input on the front of the DA-1 to
correspond with the input used on the back-
side, by pressing the “input selector” until light
appears in the corresponding “input indicator”.
And you should be ready to go…
Visit us at www.argonaudio.com
or email us at [e-mail] if you
have any questions or what like to know more
about Argon audio.
Fixed mounted
speaker cables
Adaptor plugs
for alternative
speaker cables
5. USB
(digital input)
6. Optical
(digital input)
7. Power
on/off
8. Power supply
connection
1. Input indicator
2. Input selector
3. Volume control
Operation instruction