User's Manual

ManualsBrandsARESON Technology ManualsComputers & AccessoriesWireless Mouse

Recevier

ID reset buttonLed

1. Insert the batteries

a. Remove the battery compartment cover on the top case of the mouse by pressing the

both side's battery cover button.

b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.

c. Close the battery compartments cover properly.

Wheel button

Battery cover

Battery cover button

ID reset button/

Mouse

Low power Led /

Charging Led

Introduction

Congratulations on your purchase of the most innovative wireless mini mouse. With an

incredible sensitivity to surface details and high tracking speed than other mice, the mouse

can track reliably even on tricky polished or wood-grain surfaces. It offers even more

advance that will make you more productive and more comfortable.

A. Hardware Installation

27 MHz RF (distance 1.0m)

Using state-of-art technology. High tracking speed and sensitivity.

One Channel/256 ID ( for 27Mhz models)

Storable mini receiver

Plug and Play! No need to set the channel ID.

Power on/off switch

2*AAA Alkaline batteries included .

800 dpi.

Power on/off

switch

Features

Move forward

A wrong battery placement

may cause batteries overheat.

Battery compartment

Battery compartment cover

2 AAA batteries

Press the

battery cover button

Battery compartment cover

buckle the cover

2. Connect the receiver

a. Turn off your PC.

b. Connect the receivere to USB port on PC

c. Turn on your PC

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any

button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.

USB port

Summary of content (2 pages)

PAGE 1
Introduction Congratulations on your purchase of the most innovative wireless mini mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. Battery compartment cover 2 Move forward 1 Press the battery cover button - + 2 AAA batteries Features 1 27 MHz RF (distance 1.0m) Using state-of-art technology.
PAGE 2
Mini Wireless 3. Establish communication between the mouse and receiver A. Auto-link mode: The mouse default has auto-link function, no need to reset ID when first time use. B. Manual mode: 1. Please reset the ID when necessary. (step 1) 2. Press the ID reset button on the receiver, and note the red LED will blink slowly. (step 2) 3. Press the ID reset button on the bottom of the mouse to set a new ID. (step 3) The red LED indicator will blink at a faster rate when an identical ID is located. (step 4) 4.