Wireless Mouse Manual (AA-SM0P20W / AA-SM0P25B)
IMPORTANT SAFEGUARDS This safeguard section lists many helpful tips that will be enable you to maintain the safety of the system. 1. Refrain from modifying or disassembling the product. We do not guarantee repair or exchange of the modified product. 2. To clean speaker, use dry cloth. Do not use liquid or aerosol cleaner, benzene etc. 3. Do not spill liquids or dust on product. 4. Do not touch the cable with wet hands. 5. Do not use in moist conditions.
6. Keep away from candles, lighters, sunlight etc. 7. Keep away from magnets or products with magnets. 8. Connect with PC firmly. 9. Keep out of reach of children or a pet not to bite it 10. Do not throw. Use only for intended purpose.
11. Connect to computer USB port directly. Does not work properly using USB hub or keyboard port due to lack of power. - Feature 1. 18.9mm mini size receiver suits for Notebook PC. 2. Easy switch DPI to 800 and 1600 under users’ own usage. 3. Save the power consumer by Power ON/OFF switch. 4. Plug & Play 5. Stylish design - Specification 1. Sensor type : Laser 2. Connectivity type : 2.4GHz Wireless 3.
- Part Names & Function Switch DPI Push mouse wheel button and right button simultaneously for 5 sec, then DPI switch 800 to 1600 * 800dpi : basic setting value Power On/Off switch ID reset button ID reset button USB receiver Battery cover button Slide the button upward then open the cover Battery cover
- Trouble Shooting When you have problems with your mouse, you may have one of these common problems. Symptom 1. No Power Solution - Check the battery installed properly - Check the battery polar (+),(-) installed - Changed new battery 2. Mouse not detected - Check USB receiver connecting to USB port of PC - Check Power On / Off switch - Connect to computer USB port directly. Does not work properly using USB hub or keyboard port due to lack of power.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
