Arecont Vision MegaBall™ Installation Manual 0|P a g e
Arecont Vision MegaBall™ Installation Manual MegaBall™ Wall Mount Version (-W) Installation Manual Inside the box: A. B. C. D. E. F. 3. Arecont Vision MegaBall™ camera with wall mount (indoor use only) CD with AV100 software and user manuals (license key required for recording) Mounting template Pack of three (3) wood screws and three (3) dry wall anchors One double-sided hex key (fixed focal lens version only) Security L-Key Plug the Ethernet cable into the MegaBall™ PoE female RJ45 connector.
Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (yaw): 6. To adjust the camera tilt, pan or z-axis (yaw), loosen the ring on the wall mount bracket as shown in Image 3 then adjust as necessary and retighten the ring. installation practices are not covered under warranty! Adjusting the Focus, Iris and Field of View: 7. For the vari-focal model, adjust the focus, iris and field of view using the provided Security L-Key (Image 1F) as shown in Image 5.
Arecont Vision MegaBall™ Installation Manual MegaBall™ Dome Version (-D) (-DA) Installation Manual Inside the box: Mounting the Camera: A. Arecont Vision MegaBall™ camera with inceiling mount (indoor use only) B. Surface mount (preassembled on dome) C. Audio Bezel (-DA module only) D. O-ring (preassembled on bezel) E. Dome cover (Bubble) F. CD with AV100 software and user manuals (license key required for recording) G. One double-sided hex key (fixed focal lens version only) H. Security L-Key I.
Arecont Vision MegaBall™ Installation Manual 5. Using the provided Security L-key (Image 1F), loosen the three (3) screws securing the dome cover (Image 3). Remove the vandal resistant dome cover. NOTE: Do not remove the screws from the dome cover. In-ceiling Mount Installation (Optional) 7. 8. 9. Image 3 6. Loosen the three (3) machine screws (Image 4) and remove the in-ceiling mount camera from the surface mount housing. (Image 4) Using the mounting template, cut a hole in the surface for mounting.
Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (Yaw): Adjusting the Focus, Iris and Field of View: 12. 13. To adjust the camera tilt, pan or z-axis (yaw), loosen the 3 set screws on the in-ceiling mount as shown in Image 6. Then adjust as necessary and retighten the 3 set screws. For the vari-focal model, adjust focus, iris and field of view using the provided Security L-Key (Image 1H on Page 3) as shown in Image 8.
Arecont Vision MegaBall™ Installation Manual 17. Attach the provided dome cover (Image 1D on Page 3) to the bezel as shown in Image 14. Drift Pin Image 10: Close lens iris as necessary 14. For the fixed-focal model, adjust the focus by loosening the two set screws on the front shell as shown in Image 11 using the supplied double sided hex key (Image 1G). Image 11 Image 13 Image 12 Image 14 15. Adjust the lens adapter to focus the camera as shown in Image 12.
Arecont Vision MegaBall™ Installation Manual Audio Bezel Installation ( -DA models only): 20. 21. 23. If adding dome cover (Image 1E) on the bezel is necessary, follow Step 21-23 to replace installed bezel with provided audio bezel (Image 1C) and get best audio quality. Remove O-ring (Image 1D), screws and rubber cable from default bezel as shown in Image 15. Secure the dome cover to the camera using the provided Security L-Key (Image 1H) as shown in Image 17.
Arecont Vision MegaBall™ Installation Manual Optional: Connecting Digital I/O and Audio Out: 24. To use the digital I/O, connect the digital I/O to the pigtail cable connector as shown in Image 2. NOTE: Table 1 shows the electrical characteristics and Table 2 shows cable color for digital I/O. Electrical Characteristics: Input voltage (V) (measured between + and – terminals) Output current (mA) (measured between + and – terminals) Applied Voltage Rage: 0 - 80V Min Max ON 2.9 6.3 OFF 0 1.
Arecont Vision MegaBall™ Installation Manual NOTE 1: Basic Mode: software will automatically discover and change / assign IP address to match PC subnet if they are not locked. NOTE 2: Advanced Mode: software will automatically discover but allow manual update of the IP address. See “AV100 Installation Manual” (found on the CD) for details on Advanced Mode. NOTE : Double click the camera model on the Camera Installer as shown in Image 22 to access the camera web interface.
Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Wall Mount (D4S-WMT-B or D4S-WMT) Installation Instructions Inside the box: A. B. C. Wall mount ( Fits ¾” NPT Standard) Pack of three (3) machine screws, four (4) wood screws and four (4) dry wall anchors Mounting template NOTE: D4S-WMT-B color is black and D4SWMT color is light grey. Image 25 Not included but needed: • 5. 6. #2 Phillips screw driver 7.
Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Pendant Mount (D4S-CMT-B or D4S-CMT) Installation Instructions Inside the box: A. B. C. 3. Pendant Mount (Fits with ¾” NPT) Pack of three (3) machine screws, three (3) wood screws and three (3) dry wall anchors Mounting template Attach surface mount (Image 1B on Page 3) to pendant mount as shown in Image 28 using three machine screws provided. NOTE: D4S-CMT-B color is black and D4SCMT color is light grey.
Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Junction Box Adapter (SV-JBA) Installation Instruction Inside the box: A. B. C. D. E. Junction Box Adapter Pack of four (4) machine screws One double-sided hex key Pack of four (4) wood screws and four (4) dry wall anchors Mounting template Not included but needed: • • • Image 31 #2 Phillips screwdriver Wall Mount, MD-WMT ¾” NPT Conduit (if necessary) A B C D E Conduit hole Image 30 1. 2. 3.
Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Electrical Box Adapter (SV-EBA) Installation Instructions Inside the box: (Accessory Sold Separately) A. B. Electrical Box Adapter Pack of four (4) machine screws Image 34-1 Single gang box A D4S-WMT Bracket holes Image 34-2 Double gang box Image 33 Not included but needed: • • #2 Phillips head screwdriver Common electrical box, such as single gang box, double gang box, or square electrical boxes shown in Image 34-1~4.
Arecont Vision MegaBall™ Installation Manual R 1|P a g e
