Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Installation Manual Inside the box: A. B. C. D. E. F. ® Arecont Vision SurroundVideo camera Mounting template RJ45 female to female coupler Hex key Security L-key Pack of four (4) wood screws and four (4) dry wall anchors Mounting the Camera: 1. Remove camera and hardware from the box. 2. Using the mounting template, prepare the mounting provisions for camera installation.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual 4. If using in-ceiling mount, please use #2 Phillips head screwdriver to loosen the four (4) machine screws (Image 3) and remove inceiling mount housing from surface mount housing. (Image 4) In-Ceiling Mount NOTE 1: The above removed screws are also used to attach the camera with in-ceiling mount housing to the pendant mount (Image 5) and wall mount (Image 6). Do not disregard.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual Connecting External Power: (Optional) 5. If you are using the side conduit opening on the surface mount, remove the conduit plug by first removing the socket set screw using the provided Allen key (Image 7) and remove the conduit plug using a flat screwdriver. 6. If the camera is powered by an outside power supply, 12~20VDC or 24VAC, connect the power cable shown in Image 8.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual Connecting Digital I/O: (Optional) 7. Connecting Heater and Blower : (AV8185DN-HB and AV8365DN-HB only) To use digital I/O, connect the I/O cable shown in image 8. Electrical Characteristics: ON OFF ON Input voltage (V) (measured between + and – terminals) Output current (mA) (measured between + and – terminals) Applied Voltage Rage: 0 - 80V OFF Min 2.9 0 - 8. Max 6.3 1.3 50 0.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual 9. Align the holes in the camera with the prepared holes on the mounting surface. Attach the camera with in-ceiling mount housing to the surface mounting housing shown in Image 4. 10. To insert camera with in-ceiling mount into hard ceiling with the wood screws or any optional hardware suitable for the mounting surface shown in Image 10 Adjusting Tilt, Pan and Focus: 10. Power on camera to adjust tilt, pan and focus. 11.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual 13. To adjust the tilt, use a #2 Phillips screwdriver to loosen both screws on the sides of the plastic gimbal bracket 1/4 turn (Image 15 and 16). CAUTION: Do not remove the screws! 14. Adjust lens tilt as required and tighten the screws from step 13 shown in image 17. 100° NOTE: the camera has 2-Axis gimbal with 360° pan and 100° tilt for easy and accurate positioning. Image 17 Image 15 15.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual Adjusting Each Sensor Tilt : ( AV8365DN only) NOTE: Each sensor tilt angle can be adjusted by +/- 10° to remove the dead spot at dome bottom or at the horizon. 15. To adjust each sensor tilt angle, use a #1 Philips screwdriver to turn set screws, shown in Image 19 and Image 20. 16. Remove the protective film from the camera dome. NOTE: be careful not to scratch the vandal dome cover. 17.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Pendant Mount SV-CMT Installation Instructions Inside the box: A. B. C. D. E. F. Pendant pole Top shield Pendant Mount One double sided hex key Pack of four (4) wood screws and four (4) dry wall anchors Mounting template Not included but needed: Image 22 #2 Phillips head screw driver A B C Image 23 18. Remove Pendant Mount and hardware from the box. 19.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Wall Mount SV-WMT Installation Instructions Inside the box: A. B. C. D. E. Top shield Wall mount One double sided hex key Pack of four (4) wood screws and four (4) dry wall anchors Mounting template Not included but needed: Image 25 #2 Phillips head screw driver B A Image 26 24. Remove Wall Mount and hardware from the box. 25. Using the Mounting template, prepare the mounting surface. 26.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Flush Mount Adapter Installation Instructions In-Ceiling mount Inside the box: A. B. C. D. E.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual 34. Using the Mounting template, cut a hole in surface for mounting. 35. Insert Flush Mount Adapter into the hole. 36. Screw the “lever screws” until the flush mount is snuggly installed, as shown in Image 31. The “Support Arm” will ride down the screw to compress the mounting surface. (Image 32) Support Arm NOTE: Do not over-torque the lever screws 37. 38.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Pole Mount Adapter Installation Instructions Inside the box: A. B. C. D. E. 41. Pole Mount Adapter 2x Compress Fittings 2x Small Steel Straps 2x Large Steel Straps Pack of four (4) machine screws 42. Run Ethernet Cable and outside power cable (if necessary) through the Compress Fittings and SV-WMT, Wall Mount Adapter. 43.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Corner Mount Adapter Installation Instructions Inside the box: A. B. C. D. Corner Mount Adapter 2x Compression Fittings Pack of four (4) machine screws 2x Packs of four (4) wood screws and four (4) dry wall anchors 47. Install Compress Fittings to Corner Mount Adapter as shown in Image 39. 48. Attach Wall Mount Adapter to Corner Mount Adapter as shown in Image 40.
Arecont Vision H.264 Day/Night SurroundVideo® Series Installation Manual ® H.264 Day/Night SurroundVideo Electrical Box Adapter Installation Instructions Inside the box: A. B. Electrical Box Adapter Pack of four (4) machine screws Not included but needed: #2 Phillips head screw driver Common Electrical Box, such as single gang box, double gang box, or square electrical boxes shown in Image 42-1~4.
R. 12 .