Specification Sheet
• Opmised for stac pressure
• Ideal choice on heatsinks, radiators and (partly-) covered case vents
• Newly developed, very quiet motor
• Wide RPM range
• Extended life span
• High Quality Bearing
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Push- or pull-conguraon
P8 PWM PST CO
The P8 PWM PST CO is a 80 mm fan with PWM PST connectors. It features completely redesigned fan blades and is opmised for high stac pressu-
re. Thanks to this, it is especially eecve when used on heatsinks and in situaons with higher air resistance. With its japanese dual ball bearing, the
P8 PWM PST CO is opmised for connous operaon. The wide RPM range from 200 to 3.000 RPM can be regulated seamlessly and synchronously
with other fans thanks to ARCTIC‘s PWM Sharing Technology (PST). The newly developed motor with a low coil temperature signicantly increases
the life span of the fan. Therefore we have extended the warranty to 10 years.
Designed by ARCTIC
Pressure-opmised 80 mm Fan with PWM PST for Connuous Operaon
Specifications
Fan 80 mm, 3.000 RPM
Airflow 23.4 CFM/40.3 m³/h (@ 3.000 RPM)
Static Pressure 1.9 mm H
2
O (@ 3.000 RPM)
Noise Level 0.3 Sone (@ 3.000 RPM)
Bearing Dual Ball Bearing
Current/Voltage 0.09 A/+12 V DC
Connector
4-pin Connector + 4-pin Socket
Dimensions 80 (L) x 80 (W) x 25 (H) mm
Weight 78.5 g
Opmised for Stac Pressure
During the development of the new P8 PWM PST CO, special
emphasis was placed on a focused airstream and thus a high
stac pressure. The fan guarantees extremely ecient cooling,
even with increased air resistance. Therefore, the P8 PWM PST
CO is parcularly suitable for use on heatsinks and radiators.
More Ecient Technology
The motor is powered by a Neodym-Iron-Boron-Magnet ring
of the newest generaon, which allows the new P8 PWM PST
CO to run much more eciently than its predecessors.
This saves energy and lowers the coil temperature without
comprimising the performance.
P8 PWM PST CO
Power Consumpon
0.09 A @ 3.000 RPM
0.16 A @ 2.000 RPMF8 PWM PST CO