Manual

It is easy to mistake the IR cable port
on the front for the power port. Please
ensure that the power adapter is plugged
into the appropriate port at the back.
Insert power
cable here
Setup: Step One
Setup: Step Two
Place the yellow unit next to your display.
Setup: Step Three
Place the red unit in front of the device that
you wish to control. Ensure that the IR emitter
has a clear line of sight to the IR “eye” of your
device.
External IR
Receiver
External IR
Dual Emitter
If you want to extend the reach or hide the receiver or emitter,
connect the external IR reciver to the yellow unit, connect the
external IR dual emitter to the red unit. The external IR receiver
will add another receiver you can point your remote at. The
external IR dual emitter can attach to the IR “eye” of the device
you wish to control.
Optional IR Cables
Channel 5
Channel 5Channel 7
Channel 7
0
9
6
8
7
4
1
3
2
5
0
9
6
8
7
4
1
3
2
5
0
9
6
8
7
4
1
3
2
5
0
9
6
8
7
4
1
3
2
5
0
9
6
8
7
4
1
3
2
5
Wireless Receivers will only communicate with the Wireless
Transmitter that are set to the same channel. The Wireless
supports up to ten unique channels of communication.
Setting the frequency to “0” will allow communication to previous
models of the Wireless IR Extender. After changing the frequency,
please reset the device.
Multizone
Setup One
Setup Two
Setup Three
Setup Four
More receivers and
emitters can be added
as you need them.
The Wireless IR Remote Extender is designed to get your remote control's signal where it needs to go.
Control your home theater video sources like Blu-Ray, DVD, video players and receivers, and anything else that
uses a standard IR remote control through walls and other obstructions by extending the IR signal wirelessly
with this kit. With our unique Multizone technology, you have even more control over where you want your IR
signals to go and where not to go.
Wireless IR Remote Control Extender Kit with Pairing Function
Wireless IR Receiver
Wireless IR Transmitter
Dual IR Emitter Cable
IR Receiver Cable
(2) 5V 500mA P
ower Supply
User Guide
Box Contents
Safety
!
Please read all instructions carefully before using the device.
-Unpack the equipment carefully and save the original box and packing material for possible future shipment.
-Follow basic safety precautions to reduce the risk of re, electrical shock and injury.
-Do not dismantle the housing or modify the module in any way. It may result in electrical shock or burn.
-Using equipment or parts not meeting the product’s specications may cause damage, deterioration or malfunction.
-Refer all servicing to qualied service personnel at Digital World NZ LTD.
-To prevent re or shock hazard, do not expose the usnit to rain, moisture or install this product near water.
-Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
-Unplug the power cord when left unused for a long period of time.
-Please do not burn or mix with general household waste.
Port Diagram
Optional IR
emitter cable
port
Status LED
Built-in
IR Emitter
Status LED
Built-in
IR Receiver
Optional IR
receiver cable
port
@
SPECIFICATIONS
IR:
1.
Compatible with all Universal full band carrier frequency infrared Remot
e
2.
Better IR receive sensitivity (distance), over 7 meters
RF:
1.
Long range transmission over 100-300 meter (open space)
2.
915.1MHz RF technology to ignore current 433MHz RF-interference
3.
FSK modula
tion:
Better signal sensitivity than ASK modula
tion
Better Anti RF-interference than ASK modulation
Better noise suppr
ession
4.
Digital encrypted function ensures safety and reliability