Instructions / Assembly

If you have any questions about how to install your hardware, please call us directly at [phone]
or contact us at [e-mail].
Cabinet Hardware Installation Instructions
310) 374-5700
www.architecturalmailboxes.com
Recommended Tools
(not included)
3/16” Drill bit
#2 Phillips screwdriver
Power drill
Pencil
1
Locate area of installation.
*For pulls, measure the center to center hole distance.
2
3
Ruler
Drill holes at each mark.
*For best accuracy, drill slowly and apply light pressure.
Measure and mark the location of each hole with a ruler
or tape measure. Check that the holes are level.
4
Align holes on hardware with the drilled holes
and secure with screws.
!
DO NOT overtighten.
HARDWARE
-or-
Tape Measure
(2) #8-32 screws, 1” length
(2) #8-32 screws, 1.5” length
(1) #8-32 screws, 1” length
(1) #8-32 screws, 1.5” length
For Knobs
For Pulls
© 2017, Architectural Mailboxes Rev I