User's Manual

ManualsBrandsArcher Wireless ManualsElectronicsBluetooth Car Kit

BH-005 Bluetooth Car Kit User’s Manual

BH-005 BLUETOOTH CAR KIT

Function :

1. Bluetooth v1.1 compliance

2. Output level, 0dBm, class 2

3. 10 meters working range

4. Voice dialing out function by push button on the car kit (subject to mobile phone support)

5. Noise suppression microphone with flexible tube wire to fit user’s requirement

6. Automatic reconnection if Bluetooth link is disrupted

7. Speaker volume is adjustable

8. Two colour LED for standby or talking indication.

9. Echo cancellation by high performance ASIC DSP.

Summary of content (5 pages)

PAGE 1
BH-005 Bluetooth Car Kit User’s Manual I BH-005 BLUETOOTH CAR KIT Function : 1. Bluetooth v1.1 compliance 2. Output level, 0dBm, class 2 3. 10 meters working range 4. Voice dialing out function by push button on the car kit (subject to mobile phone support) 5. Noise suppression microphone with flexible tube wire to fit user’s requirement 6. Automatic reconnection if Bluetooth link is disrupted 7. Speaker volume is adjustable 8. Two colour LED for standby or talking indication. 9.
PAGE 2
10. Charging the BH005 unit, there 2 ways to charge the 3 AA recharable batteries either by the car cigar lighter or by the mains travel charger 11. Suitable for all Bluetooth mobile phones, Nokia, Sony/Ericsson Seimens , Motorola, Panasonic, Etc … Installation 1. Open the battery door and insert 3 AA batteries.(notice the direction of the battery) 2. Slide the on/off button to the position “BAT “. 3. The “LED” will start to blink (green), and BH005 unit is ready for working. 4.
PAGE 3
from the speaker, and the LED light will go out 3. Push & hold the “on/off button” to turn the BH-005 unit on, until you hear three tones coming out from the speaker, and the LED turns green & red light, and then push on/off button once more and you will hear short beep from the speaker. 4. Now you can start the pairing procedure with your Mobile Phone. 5. Note : 1.
PAGE 4
5. Enter “1,2,3 4” for pass code, then press “OK” 6. Press “OK” 7. Select “View paired device” 8. Select “BH-005” , and select “Options” 9. Select “Request conn. Authorization”, and select “No” 10. Select “Back” and “Exit” to finish pairing procedure and then you can use the BH-005 with your 8910 phone now.
PAGE 5
driving can be a distraction. Vodafone strongly recommends that you use a hands free solution when driving and, if you are in any doubt, that you find a safe place to pull over and stop before making or taking a call." Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.