QUICK START GUIDE
HAVE A QUESTION? CONTACT US ANYTIME. Phone: 1.844.692.7226 E-mail: starter@arccosgolf.com Website: arccosgolf.
ARCCOS CADDIE SENSORS REQUIRED • Arccos Link is designed exclusively for users of the Arccos Caddie platform. • Arccos Caddie requires a player to have 1 sensor attached to the grip end of every club, and the Arccos Caddie app installed on their smartphone.
TURN ON YOUR DEVICE • Turn on Arccos Link by long pressing on the crown logo.
CONNECTING ARCCOS LINK • Open the Arccos Caddie app and hold Arccos Link close to your smartphone. • Select the “Start Round” screen and toggle the Arccos Link button. Arccos Link Locator dialogue box will automatically appear. • Select the Arccos Link device with the best signal strength. You will hear two beeps when your device has connected successfully.
WEARING ARCCOS LINK • Clip Arccos Link to either your belt or pocket on the leading edge of your body (i.e. left side for right-handed players). • Ensure the microphone hole (at bottom) is clearly visible (i.e. not covered by a jacket, inside your pocket, etc.).
GET READY TO PLAY • Select your course within the Arccos Caddie app and press “Start Round.” • Place your phone anywhere that is convenient (pocket, bag, cart, etc.).
WHILE YOU PLAY • Play your round normally, with Arccos Link clipped on, and the device will automatically record all your shots. • Data from Arccos Link is seamlessly streamed to the Arccos Caddie app via a Bluetooth connection. This allows you to review your shot data at your convenience, during or after the round.
AFTER YOUR ROUND • Turn off Arccos Link by longpressing on the Arccos crown logo. A beep will confirm power down, and the indicator light will go dark. • Charge Arccos Link by connecting a micro USB cable (provided with Arccos Link).
Tips & Tricks
CHECK OUT ARCCOS ACADEMY Visit Arccos Academy (arccosacademy.com) and select the Arccos Link Educational Course for the latest hints and best practices on using the Arccos Link accessory to enhance your Arccos Caddie experience.
FCC Regulatory Compliance to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TRA REGISTERED No.: xxxxxxxx DEALER No.
ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device.