Product Specification Product Specification WN8522B 4 IEEE Dual Band 802.11n USB2.0 module v.
Product Specification Table of Contents Chapter 1 Introduction .......................................................................................................... 4 1. Introduction ................................................................................................................. 4 1.1 Product Features ........................................................................................................ 4 1.2 Applications ..............................................................
Product Specification Revision History Edition # Reason for revision Issue date Written by V 01 Initial Document Dec 22th 2009 Troy Chen V02 Revise PCB outline March 1, 2010 Troy Chen WN8522B 3
Product Specification Chapter 1 Introduction 1. Introduction WN8522B 4 is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards.
Product Specification Chapter 2 Hardware 2.1 General Overview USB 2.0 Interface and 802.11 n chipset-on-board design. Antenna: 2 Internal Antenna on board 2.2 Hardware Architecture Broadcom 4323 single chip USB2.0 2.3 Main Chipset Information BCM4323: MIMO MAC + Baseband processor and RF with fully forward compatible with IEEE 802.11n draft2.0 standard. 2.4 PCB dimension PCB dimension : 2.0 cm x 5.8.
Product Specification Chapter 3 Software 3.1 Operating System Supported Windows 2000 , Windows XP, Windows Vista 3.2 Wireless Mode Supported AP (Infrastructure) Client mode Ad-hoc mode 3.3 Security AP (Infrastructure) mode supports Static WEP that support both 64 and 128 bit keys. WPA(TKIP) with PSK Ad-hoc mode supports None (plaintext) Static WEP that supports both 64 and 128 bit keys.
Product Specification Chapter 4 WN8522B Appearance 7
Product Specification Chapter 5 Specifications Frequency Band: Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC Canada – IC Europe – ETSI Japan – STD-T66/STD-33 2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 2412~2472MHz (Ch1~Ch13) 2412~2484MHz (Ch1~Ch14) 802.11a Radio : 5 GHz 5.150~5.250GHz 5.250~5.350 GHz 5.470~5.725 GHz 5.725~5.850GHz Operating Channels: IEEE 802.
Product Specification CCK@5.
Product Specification References BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification Federal Communication Commission Interference Statement IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the compliance of thewith endthe product, which integrates thisdevice, module. This equipment hasFCC been tested andrequirement found to comply limits for a Class B digital pursuant to Part 15 of the FCC Rules.