Product Specification User’s manual AWN11NAWN11N-001 IEEE 802.11n USB2.0 Adapter v.
Product Specification Table of Contents Chapter 1 _________________________________________________ Introduction 4 1. Introduction _________________________________________________ 1.1 Product Features ___________________________________________ 1.2 Applications _______________________________________________ Chapter 2 Hardware _______________________________________________ 4 4 4 5 2.1 General Overview ___________________________________________ 2.
Product Specification Revision History Edition # Reason for revision Issue date Written by V 01 ♦ Initial Document Jan 18, 2008 Katherine Hsieh V02 ♦ Remove second LED behavior Nov 18 2009 Troy Chen WN7511A 3
Product Specification Chapter 1 Introduction 1. Introduction AWN11N-001 is a wireless 1x1 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 150 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11b and IEEE 802.11g ,and draft IEEE 802.11n standards. AWN11N-001 will enable a next generation of high-data-rate platforms for operation in the 2.
Product Specification Chapter 2 2.1 ♦ ♦ Hardware General Overview USB 2.0 Interface and 802.11 n chipset-on-board design. Antenna: 1 Internal Antenna on board 2.2 Hardware Architecture Ralink 3070 single chip USB2.0 2.3 Main Chipset Information RT3070: An 1T1R MIMO MAC + Baseband processor and RF with fully forward compatible with IEEE 802.11n draft2.0 standard. 2.4 PCB dimension 16.
Product Specification Chapter 3 3.1 Software Operating System Supported ♦ Windows 2000 , Windows XP, Windows Vista 3.2 Wireless Mode Supported ♦ AP (Infrastructure) mode(Software AP) ♦ AP (Infrastructure) Client mode ♦ Ad-hoc mode 3.3 Security ♦ AP (Infrastructure) mode supports ♦ Static WEP that support both 64 and 128 bit keys. ♦ WPA(TKIP) with PSK ♦ Ad-hoc mode supports ♦ None (plaintext) ♦ Static WEP that supports both 64 and 128 bit keys. 3.
Product Specification Chapter 4 Appearance LED 1 One Power/Link (Green) OFF All others states ON Radio On and Associated Blink Radio On and Scanning Flash Radio On and Associated and TX/RX Data WN7511A 7
Product Specification Chapter 5 ♦ Specifications Frequency Band: Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC (Ch1~Ch11) 2412~2462MHz Canada – IC Europe – ETSI Japan – STD-T66/STD-33 ♦ 2412~2462MHz (Ch1~Ch11) 2412~2472MHz (Ch1~Ch13) 2412~2484MHz (Ch1~Ch14) Operating Channels: IEEE 802.
Product Specification ♦ Rx Sensitivity:(Typical) 11b 11g HT20 HT40 ♦ data rate specification 1 -90 2 -90 5.5 -86 11 -82 6 -86 9 -85 12 -84 18 -82 24 -78 36 -75 48 -68 54 -68 MCS0 -85 MCS1 -83 MCS2 -80 MCS3 -78 MCS4 -75 MCS5 -71 MCS6 -69 MCS7 -66 MCS0 -83 MCS1 -80 MCS2 -78 MCS3 -76 MCS4 -72 MCS5 -68 MCS6 -65 MCS7 -62 Modulation DBPSK @1Mbps DQPSK@2Mbp CCK@5.
Product Specification QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mpb ♦ Current consumption(5V DC): TX: 200mA (max of all data rate 11b/g/n) RX: 200mA (max of all data rate 11b/g/n) Idle: 90mA Radio off 52mA ♦ ♦ ♦ Operating Temperature: 0 ~ 40 oC ambient Storage Temperature: -10 ~ 70 oC ambient Humidity: 5 ~ 90% and must be non-condensing ♦ Regulation and certification compliance available: ♦WHQL ♦ETSI/CE ♦ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge.
Product Specification References ♦ Ralink Reference Design Functional Specification ♦ IEEE 802.11b Standard Specification ♦ IEEE 802.11g Standard Specification ♦ IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination.
