802.11g 54Mbps USB Adapter User Guide Contents: 802.11g 54Mbps USB Adapter User Guide About the 802.11g 54Mbps USB Adapter > Network Configuration and Planning Adapter Installation and Configuration for Windows 98SE/2000/Me/ XP About the 802.11g 54Mbps USB Adapter Navigating the Wireless Configuration Utility Glossary The 802.11g 54Mbps USB Adapter is compatible with a USB port of any standard Windows laptop or desktop computer. As the 802.
802.11g 54Mbps USB Adapter User Guide Contents: 802.11g 54Mbps USB Adapter User Guide About the 802.11g 54Mbps USB Adapter Network Configuration and Planning Network Configuration and Planning > The 802.11g 54Mbps USB Adapter supports legacy Ethernet LAN network configuration options as defined by the IEEE 802 standards committee. Adapter Installation and Configuration for Windows 98SE/2000/Me/ XP The 802.
802.11g 54Mbps USB Adapter User Guide file:///C|/Arcadyan/USR/SW/English/two.
802.11g 54Mbps USB Adapter User Guide Contents: About the 802.11g 54Mbps USB Adapter Network Configuration and Planning 802.11g 54Mbps USB Adapter User Guide Adapter Installation and Configuration for Windows 98SE/2000/Me/XP System Requirements Adapter Installation and Configuration for Windows 98SE/2000/Me/ XP In order to install and use the 802.
802.11g 54Mbps USB Adapter User Guide Note: If you are connecting the 802.11g 54Mbps USB Adapter to a 1.1 USB port, you may see a message informing you that a Hi-Speed USB device is being connected to a USB port that is not Hi-Speed. This will not affect the installation procedure. Step One: Install your software and drivers Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (if your CD-ROM d
802.11g 54Mbps USB Adapter User Guide Note: Make sure the 802.11g 54Mbps USB Adapter is fully inserted into the USB port on your computer so that the 802.11g 54Mbps USB Adapter is detected. Select your country. Windows will detect the new hardware. If prompted for the location of the drivers, select Install the software automatically (Recommended) and click Next. Follow the on-screen instructions to complete the installation procedure.
802.11g 54Mbps USB Adapter User Guide You should now see a small icon for the Configuration Utility in the system tray by your clock on your computer desktop. The Configuration Utility is used to change or verify the configuration information that relates to your 802.11g 54Mbps USB Adapter. The Configuration Utility icon will be colored to indicate the status of your wireless connection: red for disconnected, yellow for connected with fair quality, and green for connected with good quality. The 802.
02.11g 54Mbps USB Adapter User Guide Register your product • At the Installation CD-ROM user interface, click the Support link. Click Product Registration and then click http://www.usr.com/productreg • You can also launch a Web browser and type in http://www.usr.com/productreg Advanced Options Enabling File and Print Sharing To enable file and print sharing over the wireless network, perform the following steps on the computers with a Wireless USB Adapter installed.
802.11g 54Mbps USB Adapter User Guide Settings, and then Network and Dial-up Connections. Right-click the LAN connection used to connect to the Internet and click Properties. Click the Sharing tab. Click the box in this window to enable Internet sharing and click Apply. Right-click the LAN connection in the list and click Properties. Select Internet Protocol and click Properties. Click the DNS tab, write down the DNS address that is listed, and return to the Networking and Dial-up Connections window.
802.11g 54Mbps USB Adapter User Guide Contents: 802.11g 54Mbps USB Adapter User Guide About the 802.11g 54Mbps USB Adapter Navigating the Wireless Configuration Utility Network Configuration and Planning Adapter Installation and Configuration for Windows 98SE/2000/Me/ XP Navigating the Wireless Configuration Utility Troubleshooting Wireless Configuration Utility The following section describes the various functions of the Wireless Configuration Utility.
802.11g 54Mbps USB Adapter User Guide Hoc connection. There are five sections to the Wireless Configuration Utility: Configuration, Link Information, IP Information, Site Survey, and Version Information. At the bottom of each page you will see a button that says either Turn Radio On or Turn Radio Off. ● ● If it says Turn Radio Off, the wireless functionality of the 802.11g 54Mbps USB Adapter is enabled. Clicking this button will disable it.
802.11g 54Mbps USB Adapter User Guide If you will be connecting to different wireless networks in different areas, you can create profiles so that you can easily switch between networks depending on your location or situation. If you attempt to connect to a network that has security settings enabled, you will need to create a profile and supply the necessary information. Refer to your wireless router's or access point's documentation for instructions on how to locate the necessary security information.
802.11g 54Mbps USB Adapter User Guide You can create a new profile by clicking New next to the Select Profile line and then entering a Profile Name in the window that opens up. After creating a profile, you can select it at any time in the dropdown menu for Select Profile. If you have Default selected, the 802.11g 54Mbps USB Adapter will not use any specific configuration information when attempting to connect to a network.
802.11g 54Mbps USB Adapter User Guide Ad hoc: Select this mode if you will be connecting to another wireless device without the use of a wireless router or access point. For Transmit Rate, you can select the speed at which you want to connect to the wireless network. If you select auto, the 802.11g 54Mbps USB Adapter will connect at the highest possible speed for the chosen network. For Power Save, you can select either Disabled or Enabled.
802.11g 54Mbps USB Adapter User Guide WEP file:///C|/Arcadyan/USR/SW/English/four.
802.11g 54Mbps USB Adapter User Guide WEP is an encryption scheme that is used to protect your wireless data communications. WEP uses a combination of 40/64-bit keys or 104/128-bit keys to provide access control to your network and encryption security for every data transmission. To decode a data transmission, each wireless client on the network must use an identical 64-bit or 128-bit. If you select WEP, you will need to select the Authentication Mode. You can select either Open or Shared.
802.11g 54Mbps USB Adapter User Guide You can also select Use Passphrase and then enter a Passphrase to use in the place of keys. If you choose this option, the wireless network or wireless devices you are going to connect to must also support this option. When you are finished entering the information, click Apply. WPA-PSK If you select WPA-PSK, you will then need to enter a Shared Secret Key (PSK). The Key should be between 8 and 63 characters long.
802.11g 54Mbps USB Adapter User Guide process. Once communication is established, the key will randomly change. This provides a higher level of security. It is recommended that you use the most secure mechanism available on your 802.11g 54Mbps USB Adapter. Note: WPA-PSK can only be used if the wireless network you want to connect to is capable of employing WPA-PSK as an authentication mode. Many older wireless devices may not be able to use WPA-PSK, so this should be verified before WPAPSK is selected.
802.11g 54Mbps USB Adapter User Guide ● ● ● ● RTS Threshold Fragment Threshold Preamble Type Transmit Power RTS Threshold is the packet size threshold at which a Request to Send (RTS) signal must be sent to the wireless receiving unit prior to the wireless sending unit opening communications. The default is 2347. Fragment Threshold determines how large a fragment is that is being sent before it is broken into multiple fragments to increase throughput. The default is 2346.
802.11g 54Mbps USB Adapter User Guide You will see a picture with a computer and a wireless device. If you see a graphic representing signal waves between the computer and the wireless device, you are connected to the wireless network. If you see a large X between the two icons, you are not connected to a wireless network.
802.11g 54Mbps USB Adapter User Guide IP Information In this screen you can view the following information for your 802.11g 54Mbps USB Adapter: ● ● ● ● IP Address This is the address that is assigned to a client on a network. IP Netmask This is the address used to mask the internal IP addresses of a network from anyone outside of the network. 255.255.255.0 is commonly used and is the binary equivalent of eight 0's.
802.11g 54Mbps USB Adapter User Guide 54Mbps USB Adapter. Both shows the incoming information and the outgoing information. Site Survey: Selecting this tab opens the Site Survey area. You will see a list of the available wireless networks to which you can connect. Double-click the appropriate network to connect to it. If you do not see the desired wireless network, click Scan to perform another search of the area.
802.11g 54Mbps USB Adapter User Guide profile with the necessary connection information for the appropriate wireless network and then selecting this profile. Refer to the Profile section in this User Guide for more information about creating a profile. The first column is the SSID (Network Name) column, which lists the SSID, or Network Name, for each available wireless network that does not have SSID Broadcast disabled.
802.11g 54Mbps USB Adapter User Guide file:///C|/Arcadyan/USR/SW/English/four.
802.11g 54Mbps USB Adapter User Guide Contents: 802.11g 54Mbps USB Adapter User Guide About the 802.11g 54Mbps USB Adapter Troubleshooting Network Configuration and Planning Adapter Installation and Configuration for Windows 98SE/2000/Me/ XP Navigating the Wireless Configuration Utility Troubleshooting Glossary Product Specifications for 802.11g 54Mbps USB Adapter U.S. Robotics Corporation Limited Warranty Regulatory Information I plugged in the 802.
802.11g 54Mbps USB Adapter User Guide 3. Type Ping followed by your IP address. To determine your IP address, refer to the previous Possible Solution. This will ensure that your computer is responding to requests and that the 802.11g 54Mbps USB Adapter is properly installed. If you cannot complete this ping, uninstall the 802.11g 54Mbps USB Adapter and repeat the installation procedure. 4. Type Ping followed by your gateway address to check the communication with your gateway.
802.11g 54Mbps USB Adapter User Guide Check to be certain the 802.11g 54Mbps USB Adapter is not in use before removing it. The computer may lock up if the 802.11g 54Mbps USB Adapter is removed while in use. If the 802.11g 54Mbps USB Adapter is not functioning correctly, perform the following steps: Windows XP Users: Click Windows Start, All Programs, 802.11g Wireless USB Adapter Utility, and then Uninstall. Windows 2000 Users: Click Windows Start, Programs, 802.
802.11g 54Mbps USB Adapter User Guide Country Telephone Austria 07110 900116 Belgium (Flemish) Online Hours http://www.usr.com/ emailsupport/de 9:00 - 17:00 Monday - Friday http://www.usr.com/ emailsupport/ea 9:00 - 17:00 Monday - Friday +32 (0) 7 023 3545 (Flemish) (French) +32 (0) 7 023 3546 (French) Denmark +45 70 10 4030 http://www.usr.com/ emailsupport/uk 9:00 - 17:00 Monday - Friday Finland +358 981710015 http://www.usr.
802.11g 54Mbps USB Adapter User Guide Russia 8-800-200200-1 http://www.usr.com/ emailsupport/ru 10:00 - 18:00 Monday - Friday Spain 902 11 7964 http://www.usr.com/ emailsupport/es 9:00 - 17:00 Monday - Friday Switzerland 0848 840 200 http://www.usr.com/ emailsupport/de 9:00 - 17:00 Monday - Friday Sweden +46 (0) 77 128 1020 http://www.usr.com/ emailsupport/ea 9:00 - 17:00 Monday - Friday United Kingdom 0870 844 4546 http://www.usr.
802.11g 54Mbps USB Adapter User Guide Contents: 802.11g 54Mbps USB Adapter User Guide About the 802.11g 54Mbps USB Adapter Glossary Network Configuration and Planning Access Point A networking device that seamlessly connects wired and wireless networks together. Ad Hoc An Ad Hoc wireless LAN is a group of computers, each with wireless adapters, connected as an independent wireless LAN. AES AES stands for Advanced Encryption System, which utilizes a symmetric 128-bit clock data encryption.
802.11g 54Mbps USB Adapter User Guide Roaming A function that allows one to travel with a mobile end system (wireless LAN mobile station, for example) through the territory of a domain (an ESS, for example) while continuously connecting to the infrastructure. SSID SSID stands for Service Set Identifier. This is the network name that is used to identify a specific wireless network. PSK PSK stands for Pre Shared Key. This is an element of the WPA encryption standard.
802.11g 54Mbps USB Adapter User Guide Contents: About the 802.11g 54Mbps USB Adapter Network Configuration and Planning 802.11g 54Mbps USB Adapter User Guide Product Specifications for the 802.11g 54Mbps USB Adapter Radio: Adapter Installation and Configuration for Windows 98SE/2000/ Me/XP Navigating the Wireless Configuration Utility Complies with IEEE 802.
802.11g 54Mbps USB Adapter User Guide 0 ~ 45 oC ambient Operating Temperature: -20 ~ 70 oC ambient Storage Temperature: Driver: Windows 98SE/2000/Me/XP file:///C|/Arcadyan/USR/SW/English/seven.
802.11g 54Mbps USB Adapter User Guide Contents: About the 802.11g 54Mbps USB Adapter Network Configuration and Planning Adapter Installation and Configuration for Windows 98SE/2000/ Me/XP Navigating the Wireless Configuration Utility Troubleshooting Glossary Product Specifications for 802.11g 54Mbps USB Adapter U.S. Robotics Corporation Limited Warranty > Regulatory Information 802.11g 54Mbps USB Adapter User Guide U.S. Robotics Corporation Two (2) Year Limited Warranty 1.0 GENERAL TERMS: 1.
802.11g 54Mbps USB Adapter User Guide and to ensure proper installation, configuration, operation and compatibility with the operating environment in which this product is to function. 2.4 CUSTOMER must furnish U.S. ROBOTICS a dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or its authorised reseller) for any warranty claims to be authorised. 3.0 OBTAINING WARRANTY SERVICE: 3.1 CUSTOMER must contact U.S. ROBOTICS Technical Support or an authorised U.S.
802.11g 54Mbps USB Adapter User Guide authorised U.S. ROBOTICS Return Centre. 4.8 U.S. ROBOTICS shall not be liable for any damages caused by delay in delivering or furnishing repaired or replaced product or part. 5.0 LIMITATIONS 5.1 THIRD-PARTY SOFTWARE: This U.S. ROBOTICS product may include or be bundled with third-party software, the use of which is governed by separate end-user license agreements provided by third-party software vendors. This U.S.
802.11g 54Mbps USB Adapter User Guide damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to CUSTOMER. When the implied warranties are not allowed by law to be excluded in their entirety, they will be limited to the TWO (2) YEAR duration of this written warranty. This warranty gives CUSTOMER specific legal rights, which may vary depending on local law. 7.
802.11g 54Mbps USB Adapter User Guide ● ● Operating Channels: ● IEEE 802.11g compliant 11 channels (US, Canada) 13 channels (ETSI) Regulatory Channel Frequency Channel Frequency (MHz) FCC Canada ETSI 1 2412 X X X 2 2417 X X X 3 2422 X X X 4 2427 X X X 5 2432 X X X 6 2437 X X X 7 2442 X X X 8 2447 X X X 9 2452 X X X 10 2457 X X X 11 2462 X X X 12 2467 X 13 2472 X 14 2484 Go to www.usr.
802.11g 54Mbps USB Adapter User Guide Please contact our support center for an RMA number before sending your product to the repair address. Product sent to the repair address without an RMA number will be returned unopened. In North America: U.S. Robotics c/o Innovate -It 935 McLaughlin San Jose, CA 95122 United States In Europe: FRS Europe BV. Draaibrugweg 2 1332 AC Almer The Netherlands In Canada: U.S.Robotics Unit-100 13751 Mayfield Place Richmond, B.C.