User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Router
- 02 /
- CONNECTING YOUR Fios Home Router
- 2.0/ Setting up Your Fios Home Router
- 2.1/ Expanding Wi-Fi coverage
- 2.2/ Computer Network Configuration
- 2.3/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING Network SETTINGS
- 4.0/ Accessing Network Settings
- 4.1/ Using Network Settings
- 05 /
- USING NETWORK CONNECTIONS
- 5.0/ Accessing Network Connections
- 5.1/ Network (Home/Office) Connection
- 5.2/ Wireless Access Point Connection
- 5.3/ Ethernet Connection
- 5.4/ Broadband Connection
- 06 /
- SETTING PARENTAL CONTROLS
- 6.0/ Activating Parental Controls
- 6.1/ Rule Summary
- 07 /
- CONFIGURING SECURITY SETTINGS
- 7.0/ Firewall
- 7.1/ Access Control
- 7.2/ Port Forwarding
- 7.3/ Port Triggering
- 7.4/ DMZ Host
- 7.5/ Static NAT
- 7.6/ IPv6 Pinholes
- 08 /
- CONFIGURING ADVANCED SETTINGS
- 8.0/ Using Advanced Settings
- 8.1/ Utilities
- 8.2/ Network Settings
- 8.3/ Date And Time
- 8.4/ DNS Settings
- 8.5/ Monitoring
- 8.6/ System Settings
- 09 /
- TROUBLE
- SHOOTING
- 9.0/ Troubleshooting Tips
- 9.1/ Frequently Asked Questions
- 10 /
- SPECIFICATIONS
- 10.0/ General Specifications
- 10.1/ LED Indicators
- 10.2/ Environmental Parameters
- 11 /
- NOTICES
- 11.0/ Regulatory Compliance Notices
142
/ CONFIGURING
ADVANCED SETTINGS
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
The host can renew an expiring lease or let it expire. If it renews a
lease, the host receives current information about network services,
as it did during the original lease, allowing it to update its network
configurations to reflect any changes that occurred since the first
connection to the network.
If the host wishes to terminate a lease before its expiration, it sends
a release message to the DHCP server. This makes the IP address
available for use by other hosts.
The DHCP server performs the following functions:
• Displays a list of all DHCP host devices connected to your
Fios Home Router
• Defines the range of IP addresses that can be allocated in the
network
• Defines the length of time the dynamic P addresses are
allocated
• Provides the above configurations for each network device and
can be configured and enabled or disabled separately for each
network device
• Assigns a static lease to a network computer to receive the
same IP address each time it connects to the network, even if
this IP address is within the range of addresses that the DHCP
server may assign to other computer
• Provides the DNS server with the host name and IP address of
each computer connected to the network