User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Router
- 02 /
- CONNECTING YOUR Fios Home Router
- 2.0/ Setting up Your Fios Home Router
- 2.1/ Expanding Wi-Fi coverage
- 2.2/ Computer Network Configuration
- 2.3/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING Network SETTINGS
- 4.0/ Accessing Network Settings
- 4.1/ Using Network Settings
- 05 /
- USING NETWORK CONNECTIONS
- 5.0/ Accessing Network Connections
- 5.1/ Network (Home/Office) Connection
- 5.2/ Wireless Access Point Connection
- 5.3/ Ethernet Connection
- 5.4/ Broadband Connection
- 06 /
- SETTING PARENTAL CONTROLS
- 6.0/ Activating Parental Controls
- 6.1/ Rule Summary
- 07 /
- CONFIGURING SECURITY SETTINGS
- 7.0/ Firewall
- 7.1/ Access Control
- 7.2/ Port Forwarding
- 7.3/ Port Triggering
- 7.4/ DMZ Host
- 7.5/ Static NAT
- 7.6/ IPv6 Pinholes
- 08 /
- CONFIGURING ADVANCED SETTINGS
- 8.0/ Using Advanced Settings
- 8.1/ Utilities
- 8.2/ Network Settings
- 8.3/ Date And Time
- 8.4/ DNS Settings
- 8.5/ Monitoring
- 8.6/ System Settings
- 09 /
- TROUBLE
- SHOOTING
- 9.0/ Troubleshooting Tips
- 9.1/ Frequently Asked Questions
- 10 /
- SPECIFICATIONS
- 10.0/ General Specifications
- 10.1/ LED Indicators
- 10.2/ Environmental Parameters
- 11 /
- NOTICES
- 11.0/ Regulatory Compliance Notices
NETWORK SETTINGS
• Guest Wi-Fi IPv6 LAN Address (automatically populated)
• DHCPv6 Client Address Range (start and end)
• LAN Link Local Address (automatically populated)
• Guest Wi-Fi Link Local Address (automatically populated)
• Subnet ID - set the site topology for your internal site
• Router Advertisement Lifetime (minutes between 0-150)
• IPv6 Address Lifetime (minutes between 3-150)
3. After entering all appropriate IPv6 settings, click Apply to
have changes take eect.
DHCPv6 WAN with LAN IPv6 Stateless Settings
1. To configure IPv6 LAN Stateless mode with DHCPv6 WAN,
select the Stateless option on the IPv6 Configuration
Control page as shown below: