User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Router
- 02 /
- CONNECTING YOUR Fios Home Router
- 2.0/ Setting up Your Fios Home Router
- 2.1/ Expanding Wi-Fi coverage
- 2.2/ Computer Network Configuration
- 2.3/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING Network SETTINGS
- 4.0/ Accessing Network Settings
- 4.1/ Using Network Settings
- 05 /
- USING NETWORK CONNECTIONS
- 5.0/ Accessing Network Connections
- 5.1/ Network (Home/Office) Connection
- 5.2/ Wireless Access Point Connection
- 5.3/ Ethernet Connection
- 5.4/ Broadband Connection
- 06 /
- SETTING PARENTAL CONTROLS
- 6.0/ Activating Parental Controls
- 6.1/ Rule Summary
- 07 /
- CONFIGURING SECURITY SETTINGS
- 7.0/ Firewall
- 7.1/ Access Control
- 7.2/ Port Forwarding
- 7.3/ Port Triggering
- 7.4/ DMZ Host
- 7.5/ Static NAT
- 7.6/ IPv6 Pinholes
- 08 /
- CONFIGURING ADVANCED SETTINGS
- 8.0/ Using Advanced Settings
- 8.1/ Utilities
- 8.2/ Network Settings
- 8.3/ Date And Time
- 8.4/ DNS Settings
- 8.5/ Monitoring
- 8.6/ System Settings
- 09 /
- TROUBLE
- SHOOTING
- 9.0/ Troubleshooting Tips
- 9.1/ Frequently Asked Questions
- 10 /
- SPECIFICATIONS
- 10.0/ General Specifications
- 10.1/ LED Indicators
- 10.2/ Environmental Parameters
- 11 /
- NOTICES
- 11.0/ Regulatory Compliance Notices
130
/ CONFIGURING
ADVANCED SETTINGS
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
• Guest Wi-Fi IPv6 LAN Address (automatically populated)
• LAN Link Local Address (automatically populated)
• Guest Wi-Fi Link Local Address (automatically populated)
• Subnet ID - set the site topology for your internal site
• Router Advertisement Lifetime (minutes between 0-150)
• Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply to
have changes take eect.
DHCPv6 PD - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you
enter that will allow your IPv6 connection to be updated by the ISP
as needed.
1. To configure IPv6 WAN Stateful (DHCPv6) mode, select the
DHCPv6-PD option on the IPv6 Configuration Control page
as shown below: