User's Guide

IPV PINHOLES
2. To create a static NAT, click Add. The Add NAT/NAPT Rule
page displays.
3. Select a source address in the Specify Address field or
enter an IP address in the text box.
4. Enter the Public IP Address.
5. If using port forwarding, select the Enable Port Forwarding
for Static NAT check box.
6. Click Apply to save changes.
7. Repeat these steps to add additional static IP addresses.
./ IPV PINHOLES
The IPv6 Pinhole feature of the Fios Home Router allows an
application to send incoming packets for a certain port number to
the destination computer by setting up the rule of authorization.
You can view the Pinhole rules created for your Fios Home Router.