AIOS-4.0 Page : 1 OEM/Integrator Manual Arcadyan Model: AIOS4.0S, AIOS4.0V, AIOS4.0R, AIOS4.
AIOS-4.0 Page : 2 Table of Contents 0. SUMMARY OF THIS PRODUCT ........................................................................................................ 3 1. SPECIFICATION................................................................................................................................. 3 1-1 Basic Specification................................................................................................................................ 3 1-2 Certification Requirement .....
AIOS-4.0 Page : 3 0. SUMMARY OF THIS PRODUCT This product is AIOS-4.0X. There are 4 types of different audio product, AIOS4.0S, AIOS4.0V, AIOS4.0R, AIOS4.0F 1. SPECIFICATION 1-1 Basic Specification 2. Item Contents Manufacture Arcadyan Shipment Name D&M JP AIOS-4.0X TYM AIOS-4.0X ANAM AIOS-4.0X Product Name Wireless LAN Network Module Series Name Lego module Model Name JP AIOS-4.0 US - Chip SOC Vendor Model name CPU Broadcom BCM58305 2.4GHz MAC/BB/RF Broadcom BCM4356 2.
AIOS-4.0 Interface Page : 4 Item Link Rate Number of ports LAN 10/100/1000M 10/100M 1 USB 2.0 1 Supply Voltage 5V Power consumption 9W Weight Under 78g Dimensions 87 x 74 x 1.
AIOS-4.0 Page : 5 2. Detail Specification 2-1. Product Specification Items Contents Vendor Broadcom Parts number BCM58305 Operation frequency 1.25GHz Dual Core Type DDR3L Width 16bit Operation Freq 1600MHz Capacity 256MB Type NAND Flash I/O speed 20ns Capacity 4Gb Wired Number of port 2 LAN Connector Type CPU RAM ROM Color Chip Standard USB Vendor Chip MAC Broadcom BCM58305 PHY Broadcom BCM58305 10BASE-T/100BASE-Tx/1000BASE-Tx - Standard - Bus power USB2.
AIOS-4.0 Page : 6 2-3-2.
AIOS-4.
AIOS-4.
AIOS-4.0 Page : 9 Drive IO Strength 2-3-4. Power Sequence BCM 58305 Power Sequence Spec Spec Measurement min(us) max Vdd3_3 ramp-up Time 100 - 711.19us VDDC_DDR_1_0 ramp-up Time - 15ms 671.58us VDD1_35 ramp-up Time - 15ms 699.80us DDR_VDD1_35 ramp-up Time - 15ms 716.31us BCM 4356 Power Sequence Spec Spec Measurement min(us) max RF_Vdd3_6 ramp-up Time 40 - 771.95us RF_dd3_6 up before RF_Vdd3_3 0 - 2.12ms 2-3-5.
AIOS-4.0 Page : 10 /sys/power/state /sys/power/state Power Irms(mA) Watt(mW) Irms(mA) Watt(mW) Irms(mA) Watt(mW) Irms(mA) Watt(mW) 5V 518.5 2592.5 2-3-6. ESD Transient SPEC ESD Test SPEC : <1> Contact 4kV <2> Air 8kV 2-3-7. PCB Dimension Arcadyan Corporation 396.1 1980.5 87 435 15.3 76.
AIOS-4.0 Page : 11 3. Wireless Specification There are two radios on module, radio 0 and radio 1. Radio 0 include a dual band (2.4 GHz and 5 GHz) WIFI and Bluetooth. Radio 1 is only 5 GHz WIFI. Radio 0 is a Station (STA), it could have soft-AP function. Soft-AP does not use DFS channel. Radio 1 is a AP. 3-1 Radio 0 specification Radio 0 include a dual band (2.4 GHz and 5 GHz) WIFI and Bluetooth. 3-1-1 WLAN0 specification Item Specification Chip BCM4356 Interface PCIe Frequency 2400~2483.
AIOS-4.0 Page : 12 MIMO 2T2R Receiver Sensitivity 2.4GHz Band IEEE 802.11b: ‐97 dBm @1 Mbps ‐88 dBm @11 Mbps IEEE 802.11g ‐92 dBm @6 Mbps ‐74 dBm @54 Mbps IEEE 802.11n HT20 ‐90 dBm @MCS0 ‐71 dBm @MCS7 IEEE 802.11n HT40 ‐87 dBm @MCS0 ‐68 dBm @MCS7 5GHz band IEEE 802.11a ‐91 dBm @6 Mbps ‐75 dBm @54 Mbps IEEE 802.11n HT20 ‐91 dBm @MCS0 ‐72 dBm @MCS7 IEEE 802.11n HT40 ‐89 dBm @MCS0 ‐69 dBm @MCS7 IEEE 802.11ac VHT20 ‐91 dBm @MCS0 ‐72 dBm @MCS8 IEEE 802.11ac VHT40 ‐89 dBm @MCS0 ‐69 dBm @MCS9 IEEE 802.
AIOS-4.0 Page : 13 3-1-2 Bluetooth specification Item Specification Chip BCM4356 Interface UART Frequence 2400~2483.5 MHz Receive sensitivity ‐80 dBm Remark 3-2 Radio 0 specification Radio 0 is Bluetooth, 2.4G and 5 GHz WIFI.
AIOS-4.0 Page : 14 ‐91 dBm @6 Mbps ‐75 dBm @54 Mbps IEEE 802.11n HT20 ‐91 dBm @MCS0 ‐72 dBm @MCS7 IEEE 802.11n HT40 ‐89 dBm @MCS0 ‐69 dBm @MCS7 IEEE 802.11ac VHT20 ‐91 dBm @MCS0 ‐72 dBm @MCS8 IEEE 802.11ac VHT40 ‐89 dBm @MCS0 ‐69 dBm @MCS9 IEEE 802.
AIOS-4.0 Page : 15 This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
AIOS-4.0 Page : 16 the grantee (the party responsible for the module grant) shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.” “The following statements must be included in the user’s manual of the end product:” Part 15.19 and 15.
AIOS-4.0 Page : 17 The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
AIOS-4.0 Page : 18 This radio transmitter (IC: 4711A-AIOS40S) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.