Owner's Manual

ManualsBrandsARCADE 1 UP ManualsElectronicsNBA Jam

ENGLISH

TROUBLESHOOTINGTROUBLESHOOTING

Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Marquee power cord is not plugged in at the back

of the monitor.

-Marquee power cord is plugged into the wrong

input.

Marquee won’t light up.

Game will not turn on.

PROBLEM POSSIBLE CAUSE SOLUTION

Game will turn ON, but there is no sound.

You hear sound but there is no picture.

Make sure power cord is plugged into the wall outlet and

there is power to that outlet. (Plug other electrical equipment

into the power outlet to make sure the outlet normally works.)

-Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Slide ON/OFF Switch located on control deck to the ON position.

-Slide upload switch on back of monitor to the ON position.

Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Slide Volume Switch located on control deck to the right.

NOTE: Push volume slide switch right to increase volume, left to

lower volume.

Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-Hold ON/OFF Switch OFF 5 seconds.

Make sure all Wires/Plugs are properly connected and all the

way set in as directed in assembly instructions.

-You may need to RESET the game. Turn the ON/OFF switch to

the OFF position. Unplug the game from the wall outlet and

wait 60 seconds to RESET the game. Plug the game back in and

turn the ON/OFF switch back to ON.

Take something thin (like a business card) and place it between

the button and the button housing and slide it back and forth to

loosen the debris.

Look at the game control section in the instruction manual to

make sure you are using the correct joystick or pressing the

correct buttons to scroll through the game selection menu.

Look at the game control section in the instruction manual to

make sure you are pressing the correct button to enter the

game.

Look at the game control section in the instruction manual to

make sure you are pressing the correct button to exit the game.

-Make sure you are holding the exit button down for 5 seconds

to exit the game.

Refer to the game control section in the instruction manual to

see how many players are able to play that game.

Look at the game control section in the instruction manual to

make sure you are pressing the correct game control buttons for

that game.

-Look at the game control loading screen on the monitor to

make sure you are pressing the correct control buttons.

(NOTE: The game controls that are printed on the control deck

are only for the feature cabinet game. The other games in the

cabinet will utilize the same buttons but react diﬀerently.)

Look at the game control section in the instruction manual to

make sure you are pressing the correct button to start the

game.

The game screen looks pixelated or there are

lines running through the image.

The game screen is frozen.

One of the buttons on the control deck is

stuck in the down position.

You are not able to scroll through the games

on the game selection menu.

You are able to scroll through the games on

the game selection menu, but you can’t

enter a game to begin playing.

You have entered the game, but you can’t

get the game to start.

You have entered the game, but you can’t

exit the game to get back to game selection

menu.

The control functions that are printed on the

control deck do not match the gameplay on

the screen for the game you are playing.

The game will not let me select 2 or 3

players for a chosen game.

-Wires/Plugs were hooked up incorrectly.

-Debris may have gotten between the button and

the button housing.

-Power cord is not plugged into wall outlet.

-Wires/Plugs are hooked up incorrectly.

-ON/OFF Switch is in the OFF position.

-Upload switch on back of monitor is in the OFF

position.

-Wires/Plugs were hooked up incorrectly.

-Volume Switch is in the OFF position.

-Wires/Plugs were hooked up incorrectly.

-The game encountered a problem when

processing the data.

-You may be pressing the wrong button to enter

the game.

-You may be pressing the wrong button to exit the

game.

-You may not be holding down the exit button

long enough.

-You may be pressing the wrong game control

buttons for the game you are playing.

-The game may only be a 1 or 2 player game.

-You may be pressing the wrong button to start

the game.

REV 01.14.20

GOLDEN TEE CLASSIC

GOLDEN TEE 2K

GOLDEN TEE ‘99

GOLDEN TEE ‘98

GOLDEN TEE CLASSIC

GOLDEN TEE 2K

GOLDEN TEE ‘99

GOLDEN TEE ‘98

MORTAL KOMBAT

MORTAL KOMBAT 2

ULTIMATE MORTAL KOMBAT 3

MORTAL KOMBAT

MORTAL KOMBAT 2

ULTIMATE MORTAL KOMBAT 3

FINAL FIGHT

1944 THE LOOP MASTER

GHOSTS ‘N GOBLINS

STRIDER

FINAL FIGHT

1944 THE LOOP MASTER

GHOSTS ‘N GOBLINS

STRIDER

TEENAGE MUTANT NINJA TURTLES

TURTLES IN TIME

TEENAGE MUTANT NINJA TURTLES

TURTLES IN TIME

FROGGER

TIME PILOT

TIME PILOT 84

FROGGER

TIME PILOT

TIME PILOT 84

GOLDEN TEE® GOLF, ITS®, INCREDIBLE TECHNOLOGIES®, IT®, and IT Incredible TECHNOLOGIES® are the properties of Incredible Technologies, Inc.

MORTAL KOMBAT KLASSIC and all related characters and elements © & ™ Warner Bros. Entertainment Inc.

WB GAMES LOGO: TM & © WBEI. (s15)

Viacom International Inc.

This product is manufactured by Tastemakers, LLC under the license from Konami Digital Entertainment.

©Konami Digital Entertainment

MADE IN CHINA

The NBA and individual NBA member team identifications reproduced on this product are trademarks and

copyrighted designs, and/or other forms of intellectual property, that are the exclusive property of NBA

Properties, Inc. and the respective NBA member teams and may not be used, in whole or part, without the

prior written consent of NBA Properties, Inc.

-You may be using the wrong joystick or pressing

the incorrect buttons to scroll through the games.

WARNING

ENGLISH

TO ENJOY A SAFE GAMING

ENVIRONMENT

Please use the wall anchor kit that is included

with the product.

Make sure to locate your Arcade1UP on a flat surface

WARNING: Arcade1UP assumes no liability for improper

installation or excessive loads placed on screws or bracket.

This wall anchor is not a substitute for proper adult supervision.

Serious or fatal crushing injuries can occur from furniture tip-over.

To help prevent tip-over:

• Set up Arcade1UP on a level floor.

• Never allow children to climb or hang on product.

• Always set up an anti-tip device!

Use of tip-over restraints may only reduce, but not eliminate,

the risk of tip-over.

WARNINGWARNING

*ARCADE MAY TAKE 10-15 SECONDS TO POWER ON AFTER SWITCHING ON

ENGLISH

GAME CONTROLSGAME CONTROLS

PLAYER 1

LIVE

SHOT/BLOCK PASS/STEAL

TURBO PASS/STEAL PASS/STEAL

PLAYER 4

PLAYER 2 PLAYER 3

TURBO TURBO

TURBO

SHOT/BLOCK SHOT/BLOCK

SHOT/BLOCK

PASS/STEAL

- PRESS “LIVE” BUTTON DURING PLAY THE GAME, YOU CAN CHANGE “AVAILABILITY” &

“LEAVE THE GAME”.

- PRESS “LIVE” BUTTON IN MAIN MENU, YOU CAN SET UP NETWORK, ACCOUNT &

SOCIAL OPTIONS.

MOVE ANY JOYSTICK TO SCROLL THROUGH GAME LIST

PRESS ANY BUTTON (EXCEPT LIVE) TO CHOOSE GAME

FOLLOW GAME CONTROLS BELOW FOR EACH GAME

HOLD PLAYER 1 (5 SECONDS) TO RETURN TO MAIN MENU

SLIDE SWITCH TO LEFT TO TURN OFF

SLIDE SWITCH TO RIGHT TO TURN ON

This game is designed for indoor and personal use only. It must not be installed outdoors.

The following conditions must be avoided.

1. Direct exposure to sunlight, high humidity, direct water contact, dust, high heat, or extreme cold.

2. Vibration. The game must be installed on a level surface.

Do not install in an area such that the game would present an obstacle in case of an emergency

(i.e., near fire equipment or emergency exits).

WARNING: Arcade1UP assumes no liability for improper

installation or excessive loads placed on screws or bracket.

This wall anchor is not a substitute for proper adult supervision.

ENGLISH

INPUT POWER: AC100-240V 50/60Hz 1.2A Max

POWER SUPPLY: AC/DC Adapter

MONITOR: 17” LCD

ASSEMBLED DIMENSIONS: 45.8” x 31.5” x 24.75” (116.33cm x 80cm x 63cm)

OUTPUT POWER: DC12V 3A

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. When the provided plug does

not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

14. Use only with a riser specified by the manufacturer, or sold with the apparatus. When a riser is used,

use caution when moving the riser/apparatus combination to avoid injury from tip-over.

15. The equipment shall be used at maximum 95°F (35°C) ambient temperature.

IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS

INSTALLATIONINSTALLATION

SPECIFICATIONSSPECIFICATIONS

ASSISTANCE OR SERVICEASSISTANCE OR SERVICE

Before contacting us for assistance or service, please check the "Troubleshooting" section in the Owners Manual.

If you still have questions regarding your Arcade1Up product or require technical support

Contact Arcade1Up Customer Service at www.Arcade1Up.com and click on "Contact Us".

READ BEFORE USING THE Arcade1UP

Electrical Shock Hazard. Disconnect power before removing cover.

Should only be done by a qualified technician.

SAFETY PRECAUTIONS

The following symbols are used in labels on the game to draw attention to potentially hazardous situations:

WARNING : Failure to avoid the risk may result in death or serious injury

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet that is on a circuit different from the receiver

• Consult the dealer or an experienced radio / TV technician for help.

FCC STATEMENT

WARNING : To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

ENGLISH

EPILEPSY WARNING

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to

certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen

or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the

risk of such a seizure incident, it is recommended to take a 10-15 minute break at each hour of playing.

1. Please read and comprehend all warnings stated in this manual.

2. Do not get arcade wet when cleaning.

3. Parents and guardians: Please read entire manual before allowing gamer to play.

4. The AC/DC adapter and apparatus shall not be exposed to dripping or splashing and that no object filled

with liquids, such as vases, shall be placed on apparatus.

The AC/DC adapter is used as disconnect device.

The AC/DC adapter of apparatus should not be obstructed OR should be easily accessed during

intended used. To be completely disconnect the power input, the AC/DC adapter of apparatus shall be

disconnected from the mains.

5. If appliance is provided with protective earth terminal, it should be connected to main outlet with a

protective earth connection.

6. Minimum distances 10 cm / 3.94 inches around the apparatus for sufficient ventilation.

7. The ventilation should not be impeded by covering the ventilation openings with items such as

newspaper, table-cloths, curtains etc.

8. No naked flame sources such as lighted candles should be placed on the apparatus.

9. The apparatus should only be used in moderate climates.

WARNINGWARNING

CAUTION

Servicing instructions are for use by qualied service personnel only. To reduce the

risk of electric shock, do not perform any servicing other than that contained in the

operating instructions unless you are qualied to do so.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

“ISED RF Radiation Exposure Statement Caution: To maintain compliance with the ISED’s RF

exposure guidelines, place the product at least 20cm from nearby persons.”

ENGLISH

Owners Manual

To ensure safe operation of the product, be sure to read this Owners Manual before use.

Keep this Owners Manual in a safe place for easy reference when needed.

WARNING

AGES 14+

P1P8P7P6

P4 P5P3P2

Summary of content (2 pages)

PAGE 1
P6 P7 ENGLISH ENGLISH WARNING P8 TO ENJOY A SAFE GAMING ENVIRONMENT PROBLEM Game will not turn on. Please use the wall anchor kit that is included with the product. POSSIBLE CAUSE -Power cord is not plugged into wall outlet. -Wires/Plugs are hooked up incorrectly. -ON/OFF Switch is in the OFF position. -Upload switch on back of monitor is in the OFF position. ENGLISH TROUBLESHOOTING P1 SOLUTION -Make sure power cord is plugged into the wall outlet and there is power to that outlet.
PAGE 2
P6 P7 FRANÇAIS / ESPAÑOL RÉPARATION / RESOLUCIÓN DE PROBLEMAS ATTENTION / ADVERTENCIA PROBLÈME PROBLEMA POUR PROFITER D'UN ENVIRONNEMENT DE JEU SÉCURITAIRE DISFRUTAR DE UN ENTORNO DE JUEGOS SEGUROS - Le câble d’alimentation n’est pas branché à la prise murale. - Les fils/câbles n’ont pas été branchés correctement. - Le commutateur ON/OFF est en position OFF. - L’interrupteur de téléchargement à l’arrière du moniteur est en position OFF. Le jeu ne s’allume pas.