Replacement Part List

ManualsBrandsArboria ManualsAccessoriesAndover 47.5 in. x 22.5 in. Cedar Trellis Wings for Andover Screen (2-Pack)

Power screwdriver or drill that accepts inter-

changeable bits*

Hammer

Tape measure

* A bit holder may be needed if using a drill with a

quick-change chuck.

Each product comes ready to assemble and install.

Check the next few pages to find the requirements

for installation based on the configuration of your

purchase.

INSTALLATION INSTRUCTIONS

Landscape Screens & Wings

PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLY

ITEMS/TOOLS YOU WILL NEED

Andover Arch Screen

Andover Wing Panels

6/13 445.35.09

Win FREE Arboria Products

Give us feedback about this Arboria product and be entered into a drawing to win Arboria goods. It’s easy, go to

www.Arboria.com, choose a product then click on the link to review. Be sure to enter your email and telephone so

that we may contact you if you win. Upload a photograph for an extra chance to win. Visit www.Arboria.com for official

rules. No purchase necessary.

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS LS Landscape Screens & Wings PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLY Andover Wing Panels Andover Arch Screen Win FREE Arboria Products Give us feedback about this Arboria product and be entered into a drawing to win Arboria goods. It’s easy, go to www.Arboria.com, choose a product then click on the link to review. Be sure to enter your email and telephone so that we may contact you if you win. Upload a photograph for an extra chance to win. Visit www.Arboria.
PAGE 2
Landscape Screen Arch CHECK BOX FOR THESE CONTENTS Arch Panel Arch Top Panel Rectangular Base Panel Wood Screws - 2 1/2” (4) Driver bit (if other than Phillips head) Base Panel Stakes (2) & Wood Screws - 1 5/8” (4) ARCH TO BASE ASSEMBLY Place the arch panel on top of the base panel centered over the top rail. Make sure the lath patterns match. Use the 2 1/2” screws to secure the arch panel to the base panel through the 4 predrilled holes.
PAGE 3
Landscape Screen Wings EACH WING PAIR COMES WITH THE FOLLOWING: Left-hand Wing Panel (staples facing back) Right-hand Wing Panel (staples facing back) Stakes (2) & Wood Screws 1 5/8” (4) Hinges (4) 2 per wing Hinge Screws (16) 8 per wing NOTE: If you have purchased the Wing Panels without the Arch Screen you will have 2 spare hinges. Wing ATTACHING THE WINGS Wing Panel to Wing Panel Attachment Assembly Position Wings in the desired location and in the desired angle.
PAGE 4
ATTACHING THE WINGS TO THE ARCH INSTALLATION We recommend completing the above attachment assemblies prior to final installation. Each pair of Wing Panels comes with (2) 36” Steel Stakes for in-ground, freestanding installation. These can be mounted to either the side or back of the Wing Panel frames. Drive each stake 14” to 18” into the ground in the desired location on the side or back of Panels. Be sure to position the stake such that the “U” shape of the stake faces each Panel.