Use and Care Manual

TOOLS YOU W ILL NEED
CHECK BOX FOR THESE CONTENTS
P L E A S E R E A D C O M P L E T E L Y B E F O R E YO U B E G I N A S S E M B L Y
Pyramid Trellis
A S S E M B L Y I N S T R U C T I O N S
8
PRELIMINARIES
Phillips screwdriver (electric driver recommended)
This trellis is made from natural wood, you may wish to stain or paint
it to achieve a desired look and increased resistance to nature’s ele-
ments. We recommend that you do this before assembly for best re-
sults. Follow manufacturer’s instructions when applying stain or when
painting and allow sufficient time for trellis pieces to dry prior to as-
sembly.
A NOTE CONCERNING OUR UNSTAINED TRELLIS
WORK AREA
A clean, flat work surface (floor, sidewalk, driveway or bench top) is
preferred for Step 1.
PLEASE NOTE: While screw holes are pre-drilled through the
panel faces, there are no pilot holes in edges or cap piece into which
the screws are to be driven. This is because the wood accepts
screws very easily and we want to ensure that each screw gets maxi-
mum “bite”. Be sure to hold both pieces of wood firmly in posi-
tion when starting each screw. Make sure you are driving them in
straight, particularly into the panel edges.
Solid Cap Piece (1)
Triangular Trellis Panels (4)
1
2
HARDWARE
Wood screws (28)
1
2
445.35.41 6/13
Win FREE Arboria Products
Give us feedback about this Arboria product and be entered into a draw-
ing to win Arboria goods. It’s easy, go to www.Arboria.com, choose a
product then click on the link to review. Be sure to enter your email and
telephone so that we may contact you if you win. Upload a photograph for
an extra chance to win. Visit www.Arboria.com for official rules. No purchase
necessary.