VC331 User Manual
NOTICE This user manual provides a summary of the basic product specifications and features. Before using each product, please read this user manual thoroughly. Pay special attention and adhere to the safety information throughout this manual. Some instructions in this manual are based on the Android 10 operating platform. If you are using another operating system, some operations may differ. Do not touch the LCD panel with sharp or hard objects.
Important Statement The following documents contain the private information of ARATEK Biometric Co., Ltd. (hereinafter referred to as ARATEK). The information is accurate and reliable, without the permission of the Company's management, third parties may not use or disclose arbitrary; of course, and any unauthorized copying without authorization, special conditions, limitations or informed of this information Modifications are all infringements.
General safety information: Use the following safety guidelines to help protect your device from potential damage and to help to ensure your personal safety. Also adhere to and take note of any additional cautions and safety warnings throughout this manual. WARNING: To reduce the risk of fire or electric shock, do not expose this device to extreme heat, rain or moisture.
Table of content NOTICE............................................................................................................................................................. 2 Important Statement....................................................................................................................................... 3 General safety information:.............................................................................................................................4 Table of content..
Product Introduction The versatile VC331 can be used as a compact desktop workstation for mobile biometric identification. The high-quality FBI certified single-finger scanner (FAP20) and a series of other optional data capture modules ensure. It can be quickly identified and authenticated when needed. VC331 is suitable for a variety of application scenarios and can be used for voter registration and verification, border and access control.
Product outlook Product view Dimensions: 418mm x 269mm x 354 mm Weight: 5.
SIM/TF Card Slot The TF / SIM/ SAM/card panel can only be accessed with under the port panel cover door. Lift on the port panel cover door to insert cards to the device. 1. Insert T-Flash card (micro SD) memory card into slot in correct orientation as shown above. The device can accommodate a TF card with memory of up to 128GB. A memory card can be installed at a later stage, it does not need to be purchased with the device. 2.
Earphone jack/ Volume/ Power Ear phone jack Port Ear phone jack port is allowed user insert headphone sets while listen the instructions doing the voting process. Volume Button Volume button is allowed user to adjustment device volume from low to loud. Power Button Power Button is allowed user to turn on and shut done the device.
Contact Card Reader While user looking at this device in the low right-side is the IC Contact Card Reader. Always make sure that the smart chip on your card is facing you (visible to you) when you inserting to the slot. Always inert smart chip side first (as indicated with arrow direction). See the picture below.
Barcode Reader The barcode reader is a sub-miniature area image engine optimized for barcode reading. The engine captures digital images of a barcode for transmission to a decoder to decode a 1D or 2D barcode of any format supported by the decoding software. The scanner includes an LED illumination system.
Screen The VC331 display l with high brightness and high contrast is visible under strong sunlight or in outdoor environments. Avoid direct sunlight when possible to avoid overheating. Your tablet screen is tough and scratch resistant, but direct impact of sharp objects and abrasive materials could cause damage and leave marks. Always handle with care. 13’’ touch screen Keep your tablet display clean by using a soft, lint-free cloth.
Fingerprint Scanner The VC331 can accommodate a FAP20 optical fingerprint scanner. Each fingerprint scanner is FBI certified to ensures fast high quality image capture. Fingerprint Scanner The fingerprint sensor is software activated. Simply push down finger on the capture window. Do not use excessive force. Always keep he capture window clean.
Document Scanner The document reader reads and converts the information on the paper-printed election ballot into an electronic format, which is convenient for reading and storing the information. OMR scanner, front side to load the paper. OMR scanner, back side Noted: the election ballot receipt is 80mm thermal paper, OMR document reader can read all the content and barcode images. And convert to PNG format or another electronic format to storing the information.
Thermal Printer Thermal printing is a digital printing process which produces a printed image by selectively heating coated thermochromic paper, commonly known as thermal paper, when the paper passes over the thermal print head. The coating turns black in the areas where it is heated, producing an image.
Charger The detachable mains power supply adaptor will connect to the DC Charge port on the VC331 device, and can either be used to supply power directly to the device or charge the device battery. The battery charging starts automatically. Charging port When using the VC331 device for the first time, do not connect any peripheral device except the supplied battery and Charger.
Battery Conditioning a new battery Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the Charger and fully charge the battery. 2. Turn on the device and complete setting up the operating system. 3. Disconnect the charger/adapter. 4. Operate the device using battery power. 5. Reconnect the Charger and fully charge the battery again. 6. Follow these steps again until the battery has been charged and discharged three times.
Battery percentage display digital tube Battery indicator button General battery safety information Only use the specified battery and power supply provided. Use of any other batteries or power supplies may result in fire, or damage to the device, battery, or operator. If the tablet is going to be stored for more than three months, remove the battery from the device to avoid battery damage or self-discharge. Do not disassemble the battery pack. There are no userserviceable parts inside.
Technical Specification OS Android 10 Processor Quad-core 2.0 GHz, A53, 64bit Memory 3G RAM + 32G ROM Screen 13.3 Inch, 1080*1920 USB ports Micro USB *1 USB2.0 TYPE A*2 SIM Card Micro SIM Card *2 Expansion Card TF card Up to 256G Handset 3.5mm Battery 13000mAH, 11.1V, 144.3 WH, Removable Charger/Adaptor Input: 110-240V 50/60 Hz Output: 24 V/5A Connections 3G/4G, GPS, AGPS, Bluetooth 5.
Basic operation Note that most basic operation instructions are based on the Android 10 operating system. Should you use an alternative operating system, please contact the appropriate supplier for operating instructions. Modifying the device’s operating system or installing software from unofficial sources may result in device malfunctions and data corruption or loss. These actions are violations of your VC331 license agreement and will void your warranty.
Cleaning device Turn off your device. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and from their electrical outlets. Use a soft microfiber cloth moistened with water or a non-alkaline detergent to wipe the exterior of the tablet. Do not allow water from the cloth to seep down to the tablet ports when doors are open. Gently wipe the display with a soft, lint-free microfiber cloth. Do not use alcohol or detergent on the display.
FAQ 1. How to enable USB Device Mode? ● Please follow below steps: ○ Swipe down to open the notification shade drop-down menu. ○ Click the DeviceMode icon, then the USB Device Mode will be enable. 2. How to transfer files between VC331 and PC, why VC331 can’t be found in my PC?. ● Please follow below steps: ○ Enable USB device mode. ○ Connect a PC by a Micro cable. ○ Click and open the notification message(Android system.Charging this device via USB).
3. Why I can’t use Fingeprinrt after I transfer fills between device and PC? ● When you transfer files between the device and the PC, you need to enable the USB device mode. . ● After file transfer, you have to disable the USB device mode unless your fingerprint can’t work.. 4. Is there a way we could do debugging from PC while keeping the fingerprint on? ● Yes, Please use WI-FI-debugging. Detailed steps can be found in Q5. 5.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.