Marshall 8 User Manual Guide
NOTICE This user manual provides a summary of the basic product specifications and features. Before using each product, please read this user manual thoroughly. Pay special attention and adhere to the safety information throughout this manual. Some instructions in this manual are based on the Android 11 operating platform. If you are using another operating system, some operations may differ. Do not touch the LCD panel with sharp or hard objects.
Important Statement The following documents contain the private information of Shenzhen Aratek Biometric Technology Co., Ltd. (hereinafter referred to as Aratek). The information is accurate and reliable, without the permission of the Company's management, third parties may not use or disclose arbitrary; of course, and any unauthorized copying without authorization, special conditions, limitations or informed of this information Modifications are all infringements.
General safety information: Use the following safety guidelines to help protect your device from potential damage and to help to ensure your personal safety. Also adhere to and take note of any additional cautions and safety warnings throughout this manual. WARNING: To reduce the risk of fire or electric shock, do not expose this device to extreme heat, rain or moisture.
Contents NOTICE ...........................................................................................................................................................2 Important Statement .....................................................................................................................................3 General safety information: .......................................................................................................................... 4 Main Function .................
Main Function Fingerprint scanner Barcode scanner Smart card reader NFC contactless card reader 8’’ Touch screen High-capacity battery 8’’ Touch Screen NFC Fingerprint Scanner High-capacity Battery Barcode Scanner Smart Card Reader
Specification Key Parts Specification CPU MTK8768 4xA53 2.0GHz & 4xA53 1.8GHz OS Android 11 RAM+ROM DDR4, 3G+32G（Optional 4G+64G, 6G+128G） LCD 8-inches screen , 1280*800 Touch Panel 5-Point Touch Camera (Rear) Rear 13MP AF (option 8MP) + LED Flash Camera (Front) 8MP FF (option 5MP) Wi-Fi IEEE 802.11 a/b/g/n/ac Bluetooth BT 5.
Introduction Powerful. Portable. Packed with Features. The ARATEK Marshall 8 ushers in a new age in biometric identification and authentication. From fingerprint to facial recognition, barcode to contact and contactless card reading with tamper-protection, all the way to a large 8-inch display, ARATEK Marshall 8 integrates everything needed to get the job done.
Product details Physical Characteristics: Dimensions: 212.90mm x 208.05mm x 43.
Product details continue Physical Characteristics: A700 Fingerprint Scanner NFC Contactless card reader Earphone jack port USB port USB type-c 8’’ Touchable Screen Dual SIM card ports TF card 13MP AF Camera Power button Volume rocker Removeable battery Contact card reader Barcode Scanner
Battery install/remove WARNING: Using an incompatible battery increases the risk of fire or explosion. Replace the battery only with a compatible battery purchased from the manufacturer. The battery is designed to work with your MARSHALL 8 device. Do not use a battery from any other device. WARNING: Before removing or replacing the battery, turn off the device, disconnect the AC adapter from the electrical outlet and remove any other external cables from the device.
Battery information Conditioning a new battery Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the AC adapter and fully charge the battery. 2. Turn on the device and complete setting up the operating system. 3. Disconnect the AC adapter. 4. Operate the device using battery power. 5. Reconnect the AC adapter and fully charge the battery again. 6. Follow these steps again until the battery has been charged and discharged three times.
TF/ SIM/ PASM card installation The SD/ SIM card panel can only be accessed with the left side ports under the interface plug. Open on the interface plug to insert cards to the device. The PASM card ports is under the battery. Insert T-Flash card (micro SD) memory card into slot in correct orientation as shown above. The device can accommodate a TF card with memory of up to 128GB. A memory card can be installed at a later stage, it does not need to be purchased with the device.
Earphone jack /USB/ MICRO USB Ear phone jack Port Ear phone jack port is allowed user insert headphone sets while listen the instructions doing the voting process. USB Port USB Type-A is a specification that allows USB devices, such as tablets or, to act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mice or keyboards, to be attached to them. MICRO USB This MICRO USB port is a specification that allows Marshall 8 connected with laptop and another host device.
Power Button/Volume rocker/ Customize button Power Button Power Button is allowed user to turn on and shut done the device. Volume Rocker Volume button is allowed user to adjustment device volume from low to loud. Customize button Customize button is allowed user to sets this button as a shortcut function button through Marshall 8’s setting.
IC Contact Card Reader Slot While user looking at this device in the low right-side is the IC Contact Card Reader. Always make sure that the smart chip on your card is facing you (visible to you) when you inserting to the slot. Always inert smart chip side first (as indicated with arrow direction). See the picture below.
NFC contactless card reader Near field communication (also known as NFC) enables two electronic devices to communicate with each other. For example, an NFC card and a card reader will engage with each other, with a read range of around 4cm offering more flexibility in the field than a contact card. The NFC contact area is in the device upper center. NFC Contactless card reader Barcode Scanner The barcode scanner is a sub-miniature area imager engine optimized for barcode reading.
Touch Screen The MARSHALL 8 display panel with high brightness and high contrast is visible under strong sunlight or outdoor environments. Avoid direct sunlight when possible to avoid overheating. Your tablet screen is tough and scratch resistant, but direct impact of sharp objects and abrasive materials could cause damage and leave marks. Always handle with care. Keep your tablet display clean by using a soft, lint-free cloth.
Cleaning device Turn off your device. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and from their electrical outlets. Use a soft microfiber cloth moistened with water or a non-alkaline detergent to wipe the exterior of the tablet. Do not allow water from the cloth to seep down to the tablet ports when doors are open. Gently wipe the display with a soft, lint-free microfiber cloth. Do not use alcohol or detergent on the display. FCC Statement 1.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
