User Manual
Contents A . Components 1 B. H/W Parts ⅰ. Both Sides ⅱ. Settings 2 3 C. System Settings ⅰ. Date &Time ⅱ. Wi-Fi ⅲ.Sleep ⅳ.Language 5 7 8 9 D. Application ⅰ. Settings ⅱ. Full Analysis CRM Moisture Sebum Pore Melanin Acne Wrinkle Sensitivity Result ⅰ. Email ⅱ. Mirroring 10 ⅲ. View Mode 11 12 13 14 15 16 17 18 19 20 21 23 E. Warranty 24 ※ Notes on use · The images of this manual can be different with the actual things.
Components Skin lens Sebum paper (100ea) Cradle USB cable A.
H/W Parts Both Sides ASM lens Indicate LED Volume up & down button On/off button X1 lens Lens change button Flash USB slot(5v 3A) 2 B.
H/W Parts Settings 2 1 How to turn on the power 1 2 Press and hold “Power” button. Take your finger off from the button after "Indicate LED" turned on blue. How to turn off on the power 1 2 B. H/W Parts - Settings Press and hold “Power” button. Touch "Power off".
H/W Parts Settings The default charger is American plug. Plug can be added or changed for each country. (EU, UK, AU and etc) Refer to the details as below how to change the plug type. 1 Pull out american type plug from adaptor. 2 For European type, push down European plug to American plug on the adaptor. 3 Connect USB port with charger. 1 2 3 4 B.
System Settings Date &Time 1 Touch 4 Go to "Set date". 2 button. C. System Settings - Date & Time 5 Touch button. Select the date and touch “OK” button. 3 6 Go to "Date & time" Check if the setting is correctly applied.
System Settings Date &Time 7 Touch “Select time zone” 10 6 Touch “Set time”. 8 11 Select proper time zone. Change into the current time and touch “OK” button. 9 Check if the setting is correctly applied. 12 Check if the setting is correctly applied. C.
System Settings Wi-Fi 1 Touch “Wi-Fi”. 4 Put Wi-Fi password. C. System Settings - Wi-Fi 2 Turn on Wi-Fi using On/Off button 3 5 Choose proper Wi-Fi signal. Wait until the device is connected to Wi-Fi.
System Settings Wi-Fi 7 Once the device is connected to Wi-Fi, you could see the Wi-Fi mark on upper side of the screen. Wi-Fi Usage ☞ Email Wi-Fi connection is needed to send analysis data by email. *Reference : page 7 (Wi-Fi), page 20(Email). ☞ Software update In order to update the software version. Sleep 1 8 Touch “Display”. 2 Go to "Sleep". 3 Select the option you want to apply. C.
System Settings Language 1 Touch “Language & input”. 3 C. System Settings - Language 2 Go to "Language". Select preferred language.
Application Settings 1 Touch button. 2 3 10 Go to "General Settings". Available to change Language, Version and Email setting. D.
Application CRM 1 4 Touch "Customer". After putting all information, touch . D. Application - CRM 2 5 Touch to register new customer. User's profile is created on the list. Then touch user's profile to start analyzing. 3 6 Input the information. Touch button to start analyzing.
Application Moisture 1 1 Touch the button. Please wait until vibration and sound. * Never put the sensor on the skin before the message "Touch to skin please". 3 12 Analyzing hydration and elasticity... 2 2 After checking the message "Touch to skin please", push the sensor completely to marked area of the face. * All surface of the sensor should be pushed completely. 4 Check the result. To move on next page, slide the screen from right to left. D.
Application Sebum U-zone 1 Put the sebum paper on U-zone of the cheek, then press it for 2~3 seconds. 4 T-zone 2 Take a picture of pink area of the sebum paper. Take a picture of pink area of the sebum paper. Then, touch button to analyze. D. Application - Sebum 5 3 Put the sebum paper on T-zone of forehead, then press it for 2~3 seconds. Sebum result will appear.
Application Pore zoom out 1 Touch to activate camera and put the camera onto the marked area of the face. 4 14 Result will appear. 2 5 zoom in Touch screen to bring a camera into focus and then touch to take a picture. 3 Touch button to analyze. Touch button to compare taken image with 3 sample images. - Good/Normal/Bad 6 Touch button to convert taken pore image in 3D. D.
Application Melanin zoom out 1 Touch to activate camera and put the camera onto the marked area of the face. 4 Result will appear. D. Application - Melanin 2 zoom in Touch screen to bring a camera into focus and then touch to take a picture. 5 3 Touch button to analyze. Touch button to compare taken image with 3 sample images.
Application Acne zoom out 1 Touch to activate camera and put the camera onto the marked area of the face. 4 16 Result will appear. 2 zoom in Touch screen to bring a camera into focus and then touch to take a picture. 5 3 Touch button to analyze. Touch button to compare taken image with 3 sample images. - Good/Normal/Bad D.
Application Wrinkle zoom out 1 Touch to activate camera and put the camera onto the marked area of the face. 2 Result will appear. 5 4 D. Application - Wrinkle zoom in Touch screen to bring a camera into focus and then touch to take a picture. 3 Touch button to analyze. Touch button to compare taken image with 3 sample images. - Good/Normal/Bad 6 Touch button to convert taken pore image in 3D. * For wrinkle photo, take picture of outer eye area in widthways to check crow's feet.
Application Sensitivity zoom out 1 Touch to activate camera and put the camera onto the marked area of the face. 4 18 Result will appear. 2 zoom in Touch screen to bring a camera into focus and then touch to take a picture. 5 3 Touch button to analyze. Touch button to compare taken image with 3 sample images. - Good/Normal/Bad D.
Application Result 1 Touch button or "Show All Result" to see overall result. 2 D. Application - Result Available to check the result. The worst results will be marked in red.
Application Email 1 Before sending Email, the device shall be connected to Wi-Fi.* Reference : page 7. 4 20 Select “Gmail” 2 5 Touch . Select the mail account to register on the list. 3 6 Go to "Send Email". After selecting sender's mail address, put receiver's mail address. Then touch "Send" button. D.
Application Mirroring 1 3 Touch button. Set the mirroring option "On". D. Application - Mirroring 2 4 Go to "General Settings". Capture QR code using QR code reader app. Automatically moved to App store.
Application Mirroring 5 7 22 Install “Aram VIEWER”. In your mobile device go to Wi-Fi setting. Then find SSID and connect it. Then, go to “Wi-Fi Setting”. 6 8 Mirroring will be started. D.
Application View Mode 1 3 Touch “View”. The user can select analysis parameter to take pictures in proper mode. D. Application - View Mode 2 4 In view mode, it is able to take pictures with capture button. The user can mark the defect or concern according to the image with note function.
Warranty 1 The product undergoes strict quality management and inspection process before production and introduction to market. 2 In case of functional or operational defect occurs under normal condition of use within 10 days after purchase, we will repair it for free or replace in new product. 3 When this product goes out under the normal use, we will repair it free of charge under warranty. 4 Repair cost could be charged after warranty period.
MEMO
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
HEAD OFFICE #401~402 Bundang Seoul National University Hospital Health Care Innovation Park, 172, Dolma-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13605 Rep. Korea PRODUCTION DIVISION & FACTORY #909 Byucksan Technopia, 560, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13230 Rep. Korea Tel: 070-4687-1712 / Fax: 031-732-6330 / Email: info@aramhuvis.com http://www.aramhuvis.