User Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Contents A. Components B. H/W Parts ⅰ. Both Sides ⅱ. Settings 1 2 3 C. System Settings 5 D. Program Settings 7 E. Application ⅰ. Start Analysis ⅱ. Full Analysis CRM Moisture Sebum Pore Melanin Acne Wrinkle Sensitivity Summary 8 ⅲ.View Mode 9 10 11 12 13 14 15 16 17 18 F. Warranty 19 ※Notes on use ·The images of this manual can be different with the actual things. ·The information contained in this manual and future improvements are subject to change without notice.
Components API 100 Main body with skin lens Cradle USB cable A.
H/W Parts Both Sides Start, Analysis, Result Mode up Capture Mode down Battery cover External adaptor connection Power on & off LED light & lens 2 B.
H/W Parts Settings Insert the battery 1 2 Insert the battery and gently press the battery into place. 3 Close the cover. 1 3 2 To turn on the power 1 Press and hold “Power” button. 2 "Indicate LED" starts twinkling in blue light. 2 1 When it stops, the device is ready to use. To turn off the power 1 Press and hold "Power" button. 2 "Indicate LED" will be turned off. B.
H/W Parts Settings Charger can be used for 110V & 220V. The default is 220V. 1 1 Push the plug down to up at "Push" marked. 2 2 Then 220V European type is disassembled and you can see the 110V-220V American type inside of the charger. 3 3 Choose the one you want to use and connect USB cable in adaptor. 4 B.
System Settings Download & Install PC User 1 Go to link on the browser as below. http://www.aramhuvis.com/download 2 Install the program. Tablet device or Smartphone user 1 iOS : Go to "App Store" and search "Solutionist" to download the program. 2 Android : Go to "Google Play Store" and download it. C.
System Settings How to connect with the program 1 First of all, check the Wi-Fi name and password which is described at back side of battery cover. 2 Wi-Fi name & password must be same and the format is "API_XXXX". 3 Turn on the device. 4 While turning on the device, prepare PC, Tablet, Smartphone to run the S/W. 5 Once “API” device is turned on, please go to network setting to set up the Wi-Fi connection.
Program Settings 1 General Settings Change the language, analysis mode and etc. 2 Analysis Settings Set up the skin type and analysis parameter. 3 Recommended Products Available for each analysis result. 4 About Check the current version and update is available in Wi-Fi connection. D.
Application Start Analysis 1 8 Touch “Analysis” to start. E.
Application CRM 1 Input the information. - full name, email address, gender and age group 2 Take picture of customer's face with built-in camera or use the picture you already have in device. 3 Among the customer lists, select the client to check or start analysis. 4 Check the customer information and analysis result list. E.
Application Moisture 1 Press "capture" button and when you hear "beep" sound, please put the sensor onto your skin and wait until you hear "beep" sound again. Moisture sensor 2 Check the result. step, touch To analyze next st button. or 10 E.
Application Sebum 1 Put the sebum paper onto the U-zone on the cheek, then press it for 2~3 seconds. U-zone 2 Place camera on the pink area and take picture. (U-zone) Sebum paper 3 Put the sebum paper onto the T-zone on face, then press it for 2~3 seconds. Place camera on the pink area and take picture.(T-zone) Sebum paper T-zone 4 Check the result. To analyze next ste step, touch button. or E.
Application Pore 1 Touch button tto activate camera mode. or 2 Put the camera into the skin and touch button to analyze. or 3 The result Th lt will ill be b appeared to compare with age group. Check the result. To analyze next step, touch button. Touch "Compare" b button to check the sample image. or 4 Compare your ima image with 3 sample images. -G Good d - Normal - Bad 12 E.
Application Melanin 1 Touch button tto activate camera mode. or 2 Put the camera into the skin and touch button to analyze. or 3 The result will be appeared a to compare with age group. Check the result. To analyze next step, touch button. Touch "Compare" b button to check the sample image. or 4 Compare your image ima with 3 sample images. - Good - Normal - Bad E.
Application Acne 1 Touch button to activate camera mode. or 2 Put the camera into the skin and touch button to analyze. or 3 The result will be appeared ap to compare with age group. Check the result. To analyze next step, touch button. Touch "Compare" b button to check the sample image. or 4 Compare your imag image with 3 sample images. - Good - Normal - Bad 14 E.
Application Wrinkle 1 Touch button to t activate camera mode. or 2 Put the camera into the skin and touch button to analyze. or 3 The result will be appeared ap to compare with age group. Check the result. To analyze next step, touch button. Touch "Compare" b button to check the sample image. or 4 Compare your ima image with 3 sample images. - Good - Normal - Bad E.
Application Sensitivity 1 Touch button to activate camera mode. or 2 Put the camera into the skin and touch button to analyze. or 3 The result will be appeared ap to compare with age group. Check the result. To analyze next step, touch button. Touch "Compare" b button to check the sample image. or 4 Compare your imag image with 3 sample images. - Good - Normal - Bad 4 16 E.
Summary 1 Check the result. 2 Touch button or each parameter on pentagon graph. Once you select "Show Recommended Product", product image is appeared. 3 E. Application - Summary Available to check product image.
View Mode 1 In view mode, it is able to take pictures with capture button in many times. 2 The user can select analysis parameter to take picture. 3 In one screen, you can see 4 different images maximum. 4 The user can mark the defect or concern according to the image with note function. 18 E.