User's Manual

ArradaSystems,Inc.
4633OldIronsidesDrive,Suite415,SantaClara,CA95054,USA
MaxR-900 miniPCI User’s Manual
1. Product Overview
The MaxR-900 series PCI adapter cards contain a Atheros AR5414 chip for IEEE
802.11a/b/g Wireless LAN applications. It is based on the latest industry standard
Wi-Fi Certified IEEE 802.11 b/g specifications. The mini PCI adapter cards support
key security features like Wi-Fi Protected Access (WPA), WPA2, WEP and 802.1x.
Typical application of the card is integration into other wireless products such as the
notebook computers or any other devices containing Mini PCI socket.
2. Packaging Contents
The mini PCI card package contains the following item(s):
1 x Wireless Mini PCI Adapter
3. Installation guide
Shut down the power of the platform.
Align the PCI adapter with the Mini PCI socket on the platform.
Adjust and push down the PCI adapter gently until the metal locking levers on the
Mini PCI socket is latched. (Please take note that the PCI adapter can only fit in one
direction due to the keyed notch. Wrong orientation will cause improper installation
and may damage the Mini PCI socket ! ).
Connect the antenna(s) on the mini PCI module.
Reboot on the platform.
Install drivers if necessary.
4. Frequency : 902 ~ 928 MHz
5. Electro-Magnetic Interference:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by tuning the equipment off
and on, the user is encouraged to try and correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver.

Summary of content (2 pages)