User's Manual

AradaSystems,Inc.
4633OldIronsidesDrive,Suite415,SantaClara,CA95054,USA
MaxR-900 MiniPCI User’s Manual
1. Product Overview
The MaxR-900 series PCI adapter cards contain a Atheros AR5414 chip for
IEEE 802.11a/b/g Wireless LAN applications. It is based on the latest industry
standard Wi-Fi Certified IEEE 802.11 b/g specifications. The mini PCI adapter
cards support key security features like Wi-Fi Protected Access (WPA),
WPA2, WEP and 802.1x. Typical application of the card is integration into
other wireless products such as the notebook computers or any other devices
containing Mini PCI socket.
2. Packaging Contents
The mini PCI card package contains the following item(s):
1 x Wireless Mini PCI Adapter
3. Installation guide
Shut down the power of the platform.
Align the PCI adapter with the Mini PCI socket on the platform.
Adjust and push down the PCI adapter gently until the metal locking levers on
the Mini PCI socket is latched. (Please take note that the PCI adapter can
only fit in one direction due to the keyed notch. Wrong orientation will cause
improper installation and may damage the Mini PCI socket! ).
Connect the antenna(s) on the mini PCI module.
Reboot on the platform.
Install drivers if necessary.
4. Frequency: 902 ~ 928 MHz
5. Electro-Magnetic Interference:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna

Summary of content (2 pages)