SDS

Lubrication Technologies Material Safety Data Sheet
Annovi Crankcase Oil (0199) • Page 1 of 6
900 MENDELSSOHN AVE N • GOLDEN VALLEY, MN 55427 • PHONE [phone] • FAX [phone]
Lubrication Technologies, Inc. Emergency (8-4 CST): 800-424-9300
900 Mendelssohn Avenue North
Golden Valley, Minnesota, USA Information (8-4 CST): 763-545-0707
55427-4309 Fax: [phone]
[e-mail]
SECTION 1 CHEMICAL PRODUCT IDENTIFICATION
Product: Annovi Crankcase Oil
Synonyms/Other:
Not Applicable
Item Number:
805-AR64516
MSDS Number:
0199
Product Type:
Crankcase Oil
Preparation/Revision Date:
03/23/2007
SECTION 2 COMPOSITION INFORMATION
INGREDIENTS CAS # % OSHA
TWA
OSHA
STEL
ACGIH
TWA
SKIN
Severely hydrotreated (paraffinic)
petroleum oils*
64742-54-7 -- 5 mg/m³
(PEL)
10 mg/m³ 5 mg/m³
(TLV)
NO
and/or
Solvent dewaxed heavy (paraffinic)
distillates*
64742-65-0 -- 5 mg/m³
(PEL)
10 mg/m³ 5 mg/m³
(TLV)
NO
Proprietary additives Mixture 10-20 -- -- -- NO
Zinc Alkyl and Long-Chain Alkyl
Dithiophosphates
68649-42-3 1-5 -- -- -- NO
Comments:
* Exposure limits not defined. Limits used are for, "oil mist".
All base oils, including additive carriers, contain <3.0% DMSO extractable
material.
TWA – Time Weighted Average is the employee’s average airborne exposure in any 8-hour work shift
of a 40-hour work week which shall not be exceeded.
STEL – Short Term Exposure Limit is the employee’s 15-minute time weighted average exposure
which shall not be exceeded at any time during a work day unless another time limit is specified.
SECTION 3 HAZARDOUS IDENTIFICATION
WARNING:
- MAY CAUSE EYE IRRITATION
- MAY CAUSE SKIN IRRITATION
Eye contact:
Direct contact may cause irritation, redness, tearing and blurred vision.
Skin contact:
Avoid prolonged skin contact. This product contains materials that may cause
skin irritation. Prolonged or repeated contact may result in dermatitis (dryness,
chapping and reddening of skin).
Inhalation:
Overexposure by inhalation of hot or misted material may cause nonspecific
discomfort, such as nausea, headache, or weakness. Caution should be taken
to prevent aerosolization or misting of this product without proper respiratory
protection.
Ingestion:
Do not ingest. Product is expected to be relatively non-toxic unless lung
aspiration occurs Aspiration is not expected with this material due to viscosity
(thickness). Should aspiration occur, may lead to chemical pneumonitis which
is characterized by pulmonary edema and hemorrhage and may be fatal. Signs
of lung involvement include increased respiratory rate, increased heart rate, and
a bluish discoloration of the skin. Coughing, choking and gagging are often
noted at the time of aspiration. This product has laxative properties and may
result in abdominal cramps and diarrhea.
Other:
Not applicable.
SECTION 4 FIRST AID MEASURES
Eye contact:
Flush immediately with large amounts of water for at least 15 minutes. Eyelids
should be held away from the eyeball to ensure thorough rinsing. Get medical