products with watertight reputation 6500-915 WATERPROOF MEDIA PLAYER for Bluetooth MP3 devices OWNER'S MANUAL Bluetooth is a trademark of Jacuzzi Products Co ! PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTLAATION AND OPERATION !
Table of Contents Bluecube Media Player 6500-915 1 Getting Started 1.1 Contents 1.2 Connections 1.3 12-pin Harness Connection 1.4 Mounting the BlueCube Media Player 1.5 Power On 1.6 Handheld Remote Control Charging 1.7 Handheld Remote Control Synchronizing 3 3 3 4 4 5 5 5 2 Location of Controls 2.1 Wireless Handheld Remote Control 2.2 Using Audio Menu on Handheld Remote Control 2.3 Wired Remote Control 6 6 6 6 3. Listening to Devices 3.1 Listening via Bluetooth 3.1.1 Pairing with Bluetooth Device 3.1.
Getting Started Bluecube Media Player 6500-915 1.1 Contents 6500-915 BlueCube Media Player Wiring Harness (AQ-UNH-2) Owner's Manual 1.2 Connections 1: 12-pin Watertight Harness The 12-pin harness supplies power and ground connection to the BlueCube Media Player and four (4) speaker channel output connections from the BlueCube Media Player. 2: Spa Controller This must be connected to the spa controller. 3: Subwoofer Output Connect to a subwoofer amplifier. 4: 3.
Getting Started Bluecube Media Player 6500-915 1.3 12-pin Harness Connection The AQ-BC-6BT includes the universal harness AQ-UHN-2 in order to connect the BlueCube to power and speakers. All open wire connections should be soldered and protected against water and dust for best long term performance.
Getting Started Bluecube Media Player 6500-915 1.5 Power On The stereo (6500-915) requires +12V dc to both the red and yellow wires. When both of these wires have power, the stereo is always powered on and is indicated by a red LED coming out of the heatsink of the stereo. Ground is connected to the Black wire. If the stereo is not connected to the same power supply, please make sure to switch ON the stereo (6500915) before the spa controller is turned on.
Location of Controls Bluecube Media Player 6500-915 2.
Listening to Devices Bluecube Media Player 6500-915 3.1 Listening via Bluetooth 3.1.1 Pair with Bluetooth Device 1. Switch on your Bluetooth device. 2. Select 'AQUATIC AV' from the list of available devices to pair (no password is needed). 3.1.2 Listening via Bluetooth Device 1. Bluetooth mode will be activated once a Bluetooth device is paired. 2. Play the song from device and the sound will play through the Bluecube Media Player. 3. Press Play/Pause to play/pause the song. 4.
Specifications & Dimensions 4.1 Bluecube Media Player 6500-915 Specifications Media Supported media Device control Bluetooth/MP3 via Bluetooth / MP3 device via Jacuzzi Spa Top Side Panel, RF Handheld Remote Control or Wired Remote Control (sold separately) Inputs Auxiliary 1x stereo pair 3.5mm stereo input Subwoofer Sub-out 1x connector Power Output voltage @2 Ohm Output voltage @4 Ohm Operation voltage Max current draw Standby current draw 4x 72W 4x 45W 9.6V - 14.
Warranty Information Bluecube Media Player 6500-915 Aquatic AV offers a limited warranty of our products on the following terms: Length of Warranty 2 years on audio systems, electronics, speakers, and accessories (receipt required). Coverage This warranty covers only the original purchaser of a Aquatic AV product purchased from an authorized Aquatic AV dealer in the United States.
FCC Statements Bluecube Media Player 6500-915 FCC ID: WBQAQRFDM6B MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Aquatic AV 282 Kinney Drive San Jose, CA65112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 products with watertight reputation www.aquaticav.