User's Manual

DIGITAL MEDIA LOCKER™
AQ-DM-5UBT
OWNERSMANUAL
DIGITAL MEDIA LOCKER
CONTENTS
AQ-DM-5UBT Digital Media Locker™
2-Way RF Wireless Remote Control (AQ-RFDM-5U)
3.5mm to 3.5mm Jack Cable
Wiring Harness (AQ-UNH-2) optional
Six (6) Stainless Steel Mounting Screws
One (1) CR-2430 Battery
Mounting Template
Owner’s Manual
INSTALLATION
1. 12-pin Watertight Harness
The 12-pin harness supplies power and ground connections to the Digital Media Locker and four (4)
speaker channel output connections from the Digital Media Locker.
Do not cut or modify the 12-pin harness on the Locker side or warranty will be void.
2. FM Radio Antenna Jack
Connect antenna (AQ-ANT-1 sold separately) to female antenna receptacle. For best FM
performance make sure the antenna is extended to the highest achievable position.
3. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. 12V DC External Trigger
Allows for an external light or relay to be triggered (350mA max load).
5. Backlighting 12V DC input (orange)
Allow to connect to an external 12V DC, light up LED backlight.

Summary of content (9 pages)